Order Products : sales@su-jiao.com
NuSil MED-4035
| Category: | Rubber , Rubber |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | L1mlZt_NuSil-MED-4035.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. High consistency rubber, or HCR, consists of high molecular weight polymer combined with silica to produce a material that can be molded, extruded, or calendared into a useful end product. An HCR has the consistency of clay and is primarily formulated in a one or two part system (peroxide and platinum catalysts respectively). Most platinum cure high consistency rubbers are two component systems with an easy-to-work-with 1:1 mix ratio. Comments: HIGH TEAR |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (200% Strain) | 1.38 | MPa |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Component a | Mixing ratio by weight: 1.0 | ||
| Component B | Mixing ratio by weight: 1.0 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Platinum | ||
| Plasticity: 75 mils |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.11 | g/cm³ | |
| Curing Time (116°C) | 0.17 | hr | |
| Pot Life (25°C) | 120 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 35 | ||
| Tensile Strength | 10.3 | MPa | |
| Tensile Elongation at Break | 1000 | % | |
| Tear Strength | 35.0 | kN/m |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Bluestar Epoxy E-52D | Bluestar New Chemical Materials Co. Ltd | Epoxy | Bluestar Epoxy |
| Dynalloy™ OBC 8100-N65 | PolyOne Corporation | TPE | Dynalloy™ |
| Eltex® MED 100-MG25 | INEOS Olefins & Polymers Europe | PP Homopolymer | Eltex® MED |
| SABIC® SUPEER™ 8415 | Saudi Basic Industries Corporation (SABIC) | mLLDPE | SABIC® SUPEER™ |
| Sylvin 3280-90 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
