VICOTE® F805 Natural

Category:	PEEK , Polyetheretherketone
Manufacturer:	Victrex plc
Trademark:	VICOTE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	L02WC6_VICOTE-F805-Natural.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The VICOTE F805 natural, F806 natural and F807Blk grades have been specifically formulated to provide a tough, resilient, high wear resistant coating with varying levels of lubricants on ferrous and non-ferrous substrates such as carbon steel, cast steel and aluminium. Typical properties are high continuous use temperature of 260°C, exceptional wear, abrasion and cut through resistance at these high temperatures combined with excellent chemical resistance. VICOTE dispersions have a low level of extractables. These properties are retained at high temperatures where other release coatings may potentially fail. Contact Victrex for further details. VICOTE F805 natural, F806 natural and F807Blk dispersions are aqueous based however there are small amounts of solvents present. Refer to the appropriate MSDS sheet for details. The PEEK polymer contained in the VICOTE dispersions like other non coating grades of VICTREX® PEEK polymer are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK is renowned for. VICOTE Coatings have excellent chemical resistance. Consult the Victrex Chemical Resistance brochure for further details.

Message

The VICOTE F805 natural, F806 natural and F807Blk grades have been specifically formulated to provide a tough, resilient, high wear resistant coating with varying levels of lubricants on ferrous and non-ferrous substrates such as carbon steel, cast steel and aluminium. Typical properties are high continuous use temperature of 260°C, exceptional wear, abrasion and cut through resistance at these high temperatures combined with excellent chemical resistance. VICOTE dispersions have a low level of extractables. These properties are retained at high temperatures where other release coatings may potentially fail. Contact Victrex for further details.

VICOTE F805 natural, F806 natural and F807Blk dispersions are aqueous based however there are small amounts of solvents present. Refer to the appropriate MSDS sheet for details.

The PEEK polymer contained in the VICOTE dispersions like other non coating grades of VICTREX® PEEK polymer are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK is renowned for.

VICOTE Coatings have excellent chemical resistance. Consult the Victrex Chemical Resistance brochure for further details.

General Information
Features	Flame Retardant Good Abrasion Resistance Good Chemical Resistance Good Toughness Good Wear Resistance High Heat Resistance Low Extractables Resilient
Uses	Coating Applications
Agency Ratings	FDA 21 CFR 175.300
Appearance	Natural Color
Forms	Liquid
Processing Method	Coating Spraying

Mechanical	Nominal Value		Test Method
Coefficient of Friction ¹	0.18		ASTM G133

Additional Information	Nominal Value	Unit	Test Method
Cross Hatch Adhesion ²			ISO 2409
Aluminum	0
Mild Steel	0
Stainless Steel	0
Direct Impact ³			ISO 6272
Height	100.00	cm
Indentation depth	0.50	cm
Weight	2000	g
Konig Hardness (40.0 to 50.0 µm)	2.4	min	ISO 1522

Note Message
1 .	Using 250N Load, µm @ 10 min
2 .	Rating 0 to 5
3 .	Part 1

Resin Grade	Manufacturer	Category	Trademark
Manner Flexible PVC X3728 TRN700	Manner Plastics, L.P.	PVC, Flexible	Manner Flexible PVC
Propylplus 703	Fainplast Compounds S.r.l	PP, Unspecified	Propylplus
ExxonMobil™ LLDPE LL 6301 Series Wire & Cable	ExxonMobil Chemical	LLDPE	ExxonMobil™ LLDPE
HiFill FR® PC MCF/GB 1525 BK001	Techmer Engineered Solutions	PC	HiFill FR®
Sylvin 9067-85 White 125	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin