Order Products : sales@su-jiao.com
Elastocon® CLR40
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Kxh5ls_Elastocon-CLR40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastocon® CLR40 is a transparent thermoplastic elastomer that has been developed for applications that require resilience, high strength properties and a good surface finish. Elastocon® CLR40 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR40 can be overmolded onto polypropylene. Elastocon® CLR40 is supplied as ready to use pellets in 1000 lb. quantities. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 43 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 1.42 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 6.50 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 730 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 166 - 177 | °C | |
| Front Temperature | 182 - 188 | °C | |
| Nozzle Temperature | 193 - 204 | °C | |
| Mold Temperature | 21.1 - 37.8 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.689 - 1.38 | MPa |
| Injection instructions |
|---|
| Elastocon® CLR40 thermoplastic elastomer compound does not require drying. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | < 79.4 | °C | |
| Cylinder Zone 1 Temp. | 149 - 177 | °C | |
| Cylinder Zone 2 Temp. | 149 - 177 | °C | |
| Cylinder Zone 3 Temp. | 149 - 177 | °C | |
| Cylinder Zone 4 Temp. | 149 - 177 | °C | |
| Cylinder Zone 5 Temp. | 149 - 177 | °C | |
| Die Temperature | 149 - 177 | °C |
| Extrusion instructions |
|---|
| Compression ratio: 2.5 to 3.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PP R7701 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| Soarnol® BX6304B | Soarus L.L.C. | EVOH | Soarnol® |
| LG ABS HF380G | LG Chem Ltd. | ABS | LG ABS |
| LNP™ THERMOCOMP™ RFZ349XC compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
| PHOENIX™ 8901 | Phon Tech Industrial Company | TPE | PHOENIX™ |
