Order Products : sales@su-jiao.com
LNP™ VERTON™ UV00ASXS compound
| Category: | PPA , Polyphthalamide |
| Manufacturer: | SABIC Innovative Plastics Europe |
| Trademark: | LNP™ VERTON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KvVgcd_LNP-VERTON-UV00ASXS-compound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP VERTON UV00ASXS is a compound based on Polyphthalamide resin containing Long Glass Fiber. Also known as: LNP* VERTON* Compound UF70010 Product reorder name: UV00ASXS |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.63 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow : 24 hr | 0.41 | % | |
| Flow : 24 hr | 0.17 | % | |
| Water Absorption (23°C, 24 hr) | 0.40 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 20400 | MPa | ISO 527-2/1 |
| Tensile Stress (Break) | 245 | MPa | ISO 527-2/5 |
| Tensile Strain (Break) | 1.9 | % | ISO 527-2/5 |
| Flexural Modulus 1 | 17700 | MPa | ISO 178 |
| Flexural Stress | 417 | MPa | ISO 178 |
| Flexural Strain at Break 2 | 2.7 | % | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength 3(23°C) | 38 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength 4(23°C) | 80 | kJ/m² | ISO 180/1U |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 5 | |||
| 0.45 MPa, Unannealed, 64.0 mm Span | 297 | °C | ISO 75-2/Bf |
| 1.8 MPa, Unannealed, 64.0 mm Span | 277 | °C | ISO 75-2/Af |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 to 149 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.15 | % | |
| Rear Temperature | 316 to 327 | °C | |
| Middle Temperature | 321 to 332 | °C | |
| Front Temperature | 332 to 343 | °C | |
| Processing (Melt) Temp | 316 to 332 | °C | |
| Mold Temperature | 138 to 166 | °C | |
| Back Pressure | 0.172 to 0.344 | MPa | |
| Screw Speed | 30 to 60 | rpm |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 2 mm/min |
| 3 . | 80*10*4 |
| 4 . | 80*10*4 |
| 5 . | 80*10*4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NITRIFLEX N-300 | NITRIFLEX | NBR | NITRIFLEX |
| Dynaflex™ G7940-1001-00 | PolyOne Corporation | TPE | Dynaflex™ |
| EPO-TEK® P10 | Epoxy Technology Inc. | PI, TS | EPO-TEK® |
| LUVOCOM® 1301-8386 | Lehmann & Voss & Co. | PPS | LUVOCOM® |
| LUVOCOM® 50-7164/BL02 | Lehmann & Voss & Co. | PC | LUVOCOM® |
