Order Products : sales@su-jiao.com
Duron PA 6,6 20GF-IML
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | ProPolymers Inc. |
| Trademark: | Duron |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KvLzTP_Duron-PA-6-6-20GF-IML.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Duron PA 6,6 20GF-HSL is an impact modified, nucleated 20% glass reinforced nylon 6,6 that offers a superior combination of mechanical, electrical, and thermal properties. It is lubricated which improves mold release and surface finish. Duron PA provides outstanding processability and good chemical resistance. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 3.18 mm | 0.40 to 0.60 | % | |
| Across Flow : 3.18 mm | 0.70 to 0.80 | % | |
| Water Absorption (24 hr) | 0.70 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 119 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 117 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 7.0 | % | ASTM D638 |
| Flexural Modulus (23°C) | 5960 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 194 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 254 | °C | |
| 1.8 MPa, Unannealed | 232 | °C | |
| Melting Temperature | 249 | °C | |
| CLTE - Flow | 3.5E-5 | cm/cm/°C | ASTM D696 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TITANEX® HF1881 | Lotte Chemical Titan (M) Sdn. Bhd. | HDPE | TITANEX® |
| Vyncolit® E 8901A | Vyncolit N.V. | Epoxy | Vyncolit® |
| LEXAN™ 955U resin | SABIC Innovative Plastics Asia Pacific | PC | LEXAN™ |
| Eleme NGH045IU | Eleme Petrochemical Company Ltd | HDPE | Eleme |
| ULTEM™ 1000E resin | SABIC Innovative Plastics | PEI | ULTEM™ |
