Order Products : sales@su-jiao.com
3M™ Dyneon™ Fluoroelastomer FC 2230
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ Fluoroelastomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Kv3Wk5_3M-Dyneon-Fluoroelastomer-FC-2230.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 3M™ Dyneon™ Fluoroelastomer FC 2230 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2230 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| General Information |
|---|
| Additives Physical | Nominal Value | Unit | |
|---|---|---|---|
| Bulk Density | 1800 to 1900 | kg/m³ | |
| State at Room Temperature | Solid |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TABOND 3046 | SILON s.ro | LLDPE | TABOND |
| Monprene® CP-18126 | Teknor Apex Company | TPE | Monprene® |
| Westlake HIPS | Westlake Plastics Company | PS (HIPS) | Westlake |
| Filter-bond™ R-30-6 | Hapco Inc. | TS, Unspecified | Filter-bond™ |
| LEXAN™ HFD1413 resin | SABIC Innovative Plastics | PC | LEXAN™ |
