Category: | PP Copolymer , Polypropylene Copolymer |
Manufacturer: | GLS Polymers Pvt. Ltd. |
Trademark: | GLS PP |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | KsdEAN_GLS-PP-YN09.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
PPCP Precolor (unreinforced) |
General Information | |
---|---|
Appearance |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 0.900 to 0.910 | g/cm³ | ASTM D792 |
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.0 to 12 | g/10 min | ASTM D1238 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength 1(Yield) | 20.0 to 24.0 | MPa | ASTM D638 |
Tensile Elongation 2(Break) | > 5.0 | % | ASTM D638 |
Flexural Modulus 3 | 1100 to 1300 | MPa | ASTM D790 |
Flexural Strength 4 | 25.0 to 30.0 | MPa | ASTM D790 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact (3.20 mm) | 80 to 120 | J/m | ASTM D256 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Deflection Temperature Under Load | ASTM D648 | ||
0.45 MPa, Unannealed | 103 to 107 | °C | |
1.8 MPa, Unannealed | 55.0 to 58.0 | °C |
Injection | Nominal Value | Unit | |
---|---|---|---|
Drying Temperature | 80.0 | °C | |
Drying Time | 2.0 | hr | |
Processing (Melt) Temp | 180 to 220 | °C | |
Mold Temperature | 32.0 to 65.0 | °C | |
Injection Pressure | 68.0 to 105 | MPa |
Note Message | |
---|---|
1 . | 50 mm/min |
2 . | 50 mm/min |
3 . | 2.0 mm/min |
4 . | 2.0 mm/min |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Westlake LLDPE LF2018 | Westlake Chemical Corporation | LLDPE | Westlake LLDPE |
VECTOR® 8508 | Dexco Polymers LP | SBS | VECTOR® |
ENFLEX V1070A BLK UV | ENPLAST Americas, a Ravago Group Company | TPV | ENFLEX |
LNP™ THERMOCOMP™ WX15003 compound | SABIC Innovative Plastics Europe | PBT | LNP™ THERMOCOMP™ |
LUVOCOM® 1850/GF/30/TF/13/SI/2 | Lehmann & Voss & Co. | PBT | LUVOCOM® |