Order Products : sales@su-jiao.com
Epocast 1618 D/B
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Huntsman Advanced Materials |
| Trademark: | Epocast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Kr9PCu_Epocast-1618-D-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DESCRIPTION: Epocast® 1618-D/B epoxy syntactic is a low-density, self-extinguishing compound for potting fasteners in honeycomb structures. The lightweight epoxy is easy to extrude through a 1/8 in.(3mm) nozzle orifice, but is non- flowing after application. Epocast® 1618-D/B epoxy syntactic sets quickly at room temperature and is qualified to BMS 5-28, Type 18, Class 1. It is the suggested alternative for Epocast® 1616-A/B epoxy syntactic, Epocast® 1618-A/B epoxy syntactic, and Epocast ® 1620-A/B epoxy syntactic systems. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | ASTM D1622 | ||
| -- 1 | 0.600 | g/cm³ | ASTM D1622 |
| -- 2 | 0.700 | g/cm³ | ASTM D1622 |
| -- 3 | 1.00 | g/cm³ | ASTM D1622 |
| Viscosity | ASTM D2196 | ||
| 25°C 4 | Paste | ASTM D2196 | |
| 25°C 5 | Paste | ASTM D2196 |
| Flammability | Nominal Value | ||
|---|---|---|---|
| Flammability | Self-extinguishing |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time - 57 gms (25°C) | 15.0 | min | ASTM D2471 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Lap Shear - AL/AL (25°C) | 4.83 | MPa | ASTM D1002 |
| Weight Gain 6 | ASTM D543 | ||
| Distilled water : 25°C | 1.5 | % | ASTM D543 |
| Mil-M-5606, hydraulic fluid : 25°C | 0.40 | % | ASTM D543 |
| Mil-S-3136, Type III test fluid : 25°C | 0.30 | % | ASTM D543 |
| Skydrol 500-A : 25°C | 0.60 | % | ASTM D543 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Compressive Modulus | 2410 | MPa | ASTM D695 |
| Compressive Strength (25°C) | 34.5 | MPa | ASTM D695 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Resin | Mixing ratio by weight: 100 | ||
| Hardening method | Mixing ratio by weight: 14 | ||
| Thermoset Mix Viscosity 7(25°C) | 400 | cP | ASTM D2196 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CURE SCHEDULE: 24 hours at room temperature or gel at room temperature plus five hours at 125°F (52°C). |
| Note Message | |
|---|---|
| 1 . | Resin |
| 2 . | System |
| 3 . | Hardener |
| 4 . | System |
| 5 . | Resin |
| 6 . | on immersion - 24 hrs |
| 7 . | Hardener |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POWERSIL® INSULATOR FINISH | Wacker Chemie AG | Silicone | POWERSIL® |
| MIDILENA I LDPE B20/0.3 | ROMPETROL PETROCHEMICALS S.R.L. | LDPE | MIDILENA I |
| AIE PA66 60G5F | Asia International Enterprise (Hong Kong) Limited | Nylon 66 | AIE PA66 |
| GAPEX® APP40GR30HB GRAY | Ferro Corporation | PP Homopolymer | GAPEX® |
| Kepital® F30-51U | KEP Americas | Acetal (POM) Copolymer | Kepital® |
