Order Products : sales@su-jiao.com
Isoplast® 202EZ ETPU
| Category: | ETPU , Engineering Thermoplastic Polyurethane |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Isoplast® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KpxnKY_Isoplast-202EZ-ETPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Isoplast® 202EZ is an engineering thermoplastic polyurethane resin. Feature: NSF Standard 61 Certified |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.40 to 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1800 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 69.0 | MPa | |
| Break | 63.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 9.0 | % | |
| Break | 90 | % | |
| Flexural Modulus | 2200 | MPa | ASTM D790 |
| Flexural Strength | 90.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C, 3.20 mm | 160 | J/m | |
| 23°C, 3.20 mm | 530 | J/m | |
| Instrumented Dart Impact | ASTM D3763 | ||
| -29°C | 34.0 | J | |
| 23°C | 45.0 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 127 | °C | |
| 0.45 MPa, Annealed | 143 | °C | |
| 1.8 MPa, Unannealed | 116 | °C | |
| 1.8 MPa, Annealed | 138 | °C | |
| Vicat Softening Temperature | 144 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 125 to 135 | °C | |
| Processing (Melt) Temp | 240 to 260 | °C | |
| Mold Temperature | 95.0 to 120 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P2630 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Qenos PE GF7740F2 | Qenos Pty Ltd | HDPE, MMW | Qenos PE |
| Miramid® SE35C | BASF Leuna GmbH | Nylon 66 | Miramid® |
| Kotex KGN-30MRA | Kotec Corporation | PC | Kotex |
| ULTEM™ HU1000 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
