Order Products : sales@su-jiao.com
Braskem PP EP 445L
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Braskem |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KogZtX_Braskem-PP-EP-445L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EP 445L is a medium fluidity heterophasic copolymer with high stiffness and good impact strength. It contains antistatic and slip additives. Applications: Injection Molding of housewares and pots. Compression Molding of closures for soft drink and water bottles. Processing: Injection Molding Compression Molding |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238, ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | |||
| R-Scale, Injection Molded | 90 | ASTM D785 | |
| R-Scale | 72 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield, Injection Molded | 32.0 | MPa | ASTM D638 |
| Yield, Injection Molded | 30.0 | MPa | ISO 527-2 |
| Tensile Elongation | |||
| Yield, Injection Molded | 7.0 | % | ASTM D638 |
| Yield, Injection Molded | 6.0 | % | ISO 527-2 |
| Flexural Modulus | |||
| 1% Secant : Injection Molded | 1450 | MPa | ASTM D790 |
| Injection Molded | 1600 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| -20°C, Injection Molded | 25 | J/m | ASTM D256 |
| 23°C, Injection Molded | 80 | J/m | ASTM D256 |
| -20°C, Injection Molded | 3.3 | kJ/m² | ISO 180 |
| 23°C, Injection Molded | 7.2 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, Injection Molded | 105 | °C | ASTM D648 |
| 0.45 MPa, Unannealed | 100 | °C | ISO 75-2/B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Akulon® N22D | DSM Engineering Plastics | Nylon 6 | Akulon® |
| AZR-Ecoplast 143 HDPE red 0.4 | UrbanPlast SIA | HDPE | AZR-Ecoplast |
| CALIBRE™ 302V-10 | Trinseo | PC | CALIBRE™ |
| Hostacom X 454 | LyondellBasell Industries | PP Copolymer | Hostacom |
| Plasmer 1370N/1002 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
