Order Products : sales@su-jiao.com
Geon™ 180 Series 186A
| Category: | PVC Homopolymer , Polyvinyl Chloride Homopolymer |
| Manufacturer: | Mexichem Specialty Resins, Inc. |
| Trademark: | Geon™ 180 Series |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KnbGpg_Geon-180-Series-186A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Geon® 186A is low molecular weight homopolymer resin, providing a good balance of fused film physical properties and fusion characteristics. It provides excellent chemical foam characteristics with good overblow resistance. It gives good dispersability for plastisol preparation. Geon® 186A is recommended for applications where an overall balance of good rheological and fused film physical properties are required such as low density chemcially blown foams, fabric coating applications, and plastisol screen printing inks. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| K-Value 1 | 65.0 | Internal method | |
| Intrinsic Viscosity | 1.0 | ASTM D1243-60-A | |
| Humidity- Karl Fisher 2 | 0.060 | % | Internal method |
| Volume density | 400 | g/l | |
| Relative Viscosity 3 | 2.20 | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Optimal stretch- PP 4 | 20.7 | MPa | ASTM D638 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss- 60 degree fused 5 mins @ 350F 5 | 87 | % | Internal method |
| Transparency-Transmittance- PP 6 | 78 | % | Internal method |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brokfield Viscosity | Internal method | ||
| Initial Viscosity @ 2 rpm 7 | 9.00 | Pa·s | Internal method |
| Initial Viscosity @ 20 rpm 8 | 6.95 | Pa·s | Internal method |
| One Day Viscosity @ 2 rpm 9 | 12.6 | Pa·s | Internal method |
| One Day Viscosity @ 20 rpm 10 | 9.28 | Pa·s | Internal method |
| Cut off the outflow- 95 psi 11 | 90.00 | g/10 min | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| North fineness 12 | 4.75 | Hegman | Internal method |
| Residual Vinyl Chloride Monomer 13 | ppm | Internal method | |
| Methanol extractable 14 | 3.5 | % | Internal method |
| polymerization process | Dispersion | ||
| Gel temperature- PP 15 | 72 | °C | Internal method |
| Note:The value set forth represent "typical" values and Mexichem Specialty Resins, therefore, makes no representation that the material in any particular shipment will conform to the listed properties.Packaging: This resin is shipped in multi-wall paper bags, net weight 50 lbs, 2500 lbs per pallet. Information shown on the package includes commercial identification number, lot and weight.Geon® ALTC and ASTM D638 (formulation): 100phr Geon® 186A, 57phr DINP, 3phr ESO, and 2phr Therm-Chek SP 120 LOHFGeon® STP 390 (formulation): 100phr Geon® 186A, and 60phr DOP |
| Note Message | |
|---|---|
| 1 . | Interrelationship |
| 2 . | Karl Fisher-Geon® 683c |
| 3 . | Interrelationship |
| 4 . | With provided formulation |
| 5 . | 60°，FF，ALTC-65 |
| 6 . | Geon® ALTC 66 (with provided formulation) |
| 7 . | Initial, V12,Geon®1010 |
| 8 . | One day, V12,Geon®1010 |
| 9 . | Geon® ALTC 22 (with provided formulation) |
| 10 . | Geon® ALTC 22 (with provided formulation) |
| 11 . | 95 psi，Geon® 1010 |
| 12 . | Geon® 390 |
| 13 . | Geon® STP 1005 |
| 14 . | Geon® 894 |
| 15 . | Geon® ALTC 29 (with provided formulation) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Small Boss HS-105-1 | Tongxiang Small Boss Special Plastic Products Co., Ltd. | PVC, Unspecified | Small Boss |
| Xuchuan XCW-6020HT | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| EPO-TEK® 383ND-LH Ultra | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Polifor® E 12 TR/10 NATURALE Y1 | SO.F.TER. SPA | PP, Unspecified | Polifor® |
| PENTAMID B GK30 H LS black | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
