Order Products : sales@su-jiao.com

COPEC® CC6FDN (Series: VS/MR/AD1)

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	KRAIBURG TPE
Trademark:	COPEC®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	KmwK2F_COPEC-CC6FDN-Series-VS-MR-AD1-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The VS/MR/AD1 Series is your material solution for applications in the consumer electronics section. The series features an exceptionally silky and velvety surface, accompanied by an outstanding resistance to skin oil, sun cream and olive oil. The compounds convince due to their excellent adhesion to polar thermoplastics such as ABS, PC and PC/ABS.

Typical applications

Ear phones

Game consoles

Handles and grips for consumer applications

Remote controls

Seals

Material advantages

Easy coloring

Excellent color stability

Good weathering resistance

Insert molding possible

Pleasant surface feel (Soft touch)

Resistance against skin oil, sunscreens and olive oil

Smooth and silky surface

General Information
Features	Good color stability Good coloring Good adhesion Good weather resistance Oil resistance Soft
Uses	Handle Electrical/Electronic Applications Seals Consumer goods application field
Appearance	Natural color
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.20	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	67		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield)	8.50	MPa	ISO 37
Tensile Elongation ²(Break)	800	%	ISO 37
Tear Strength	23	kN/m	ISO 34-1

Additional Information	Nominal Value	Unit	Test Method
Adhesion to ABS	25.0	kN/m	Renault D41/1916
Adhesion to PC	23.0	kN/m	Renault D41/1916

Injection	Nominal Value	Unit
Drying Temperature	80.0	°C
Drying Time	4.0	hr
Suggested Max Moisture	0.020	%
Rear Temperature	160	°C
Middle Temperature	180	°C
Front Temperature	200	°C
Mold Temperature	40.0 - 60.0	°C
Injection Pressure	20.0 - 100	MPa
Back Pressure	2.00 - 5.00	MPa

Injection instructions
Hot Runner Temperature: 180 - 220°CThe runner should be empty after a maximum of 2 - 3 shots.

Note Message
1 .	Type S2, 200 mm/min
2 .	Type S2, 200 mm/min

Resin Grade	Manufacturer	Category	Trademark
RTP 800 TFE 10 SI 2 DEL	RTP Company	Acetal (POM) Homopolymer	RTP
APEX® SRP 2700A	Teknor Apex Company	PVC, Rigid	APEX®
Haysite Plastics Heatmeiser®	Haysite Reinforced Plastics	Polyester, TS	Haysite Plastics
ICORENE® 1901	ICO Polymers EMEA, A Division of A. Schulman	Plastomer	ICORENE®
Lucopren® SE 1522-55S	Lucobit AG	SEPS	Lucopren®