Order Products : sales@su-jiao.com
TRAMID® 4110G33
| Category: | Nylon, Unspecified , Polyamide |
| Manufacturer: | Samyang Corporation |
| Trademark: | TRAMID® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Km7twi_TRAMID-4110G33.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TRAMID® 4110G33 is a Polyamide product. It is available in Asia Pacific, Europe, or North America. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.38 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 17 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 to 0.90 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 162 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.0 | % | ASTM D638 |
| Flexural Modulus | 8830 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 255 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 212 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenite™ Propionate 360A4861312 Clear, Trsp | Eastman Chemical Company | CAP | Tenite™ Propionate |
| ULTEM™ HU2100 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| HiFill® PA6 GB30 L | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| KOPA® KN173HI2 | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
| PENTAMID A GV40 H natural | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
