Order Products : sales@su-jiao.com

Kostil® B 366

Category:	SAN , Styrene Acrylonitrile
Manufacturer:	Versalis S.p.A.
Trademark:	Kostil®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	KiGfCZ_Kostil-B-366.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Kostil B 366 is a Styrene-Acrylonitrile copolymer with a good chemical resistance and a very low residual monomers content.

This easy flow grade exhibits a high clarity and it is designed for the moulding of items with complex shapes and/or with thin walls with fast cycles.

Designation: Thermoplastics ISO 4894-SAN 2,MRS,105-25

Applications: Lighting, bathroom furnishing, catering (cups, trays), stationery, toys, displays. Cosmetic, medical and pharmaceutical items.

Kostil B 366 is available in some standard transparent colours (2000, 2030, 2050).

This grade, in natural version, complies by composition with the requirements set by the main Regulations for plastic materials intended for food contact (included the EEC Directive 90/128 and following amendments).

General Information
Features	Copolymer Fast Molding Cycle Food Contact Acceptable Good Chemical Resistance Good Flow High Clarity Low Residuals
Uses	Bathroom Accessories Cosmetics Cups Decorative Displays Lighting Fixtures Medical/Healthcare Applications Pharmaceuticals Stationary Supplies Support Trays Thin-walled Parts Toys
Agency Ratings	EU 90/128/EEC
Appearance	Clear/Transparent Natural Color
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1) Shear Modulus vs. Temperature (ISO 11403-1) Specific Heat vs. Temperature (ISO 11403-2) Specific Volume vs Temperature (ISO 11403-2) Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Density	1.07	g/cm³	ISO 1183
Apparent Density	0.65	g/cm³	ISO 60
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)	30	g/10 min	ISO 1133
Molding Shrinkage	0.40 to 0.60	%	Internal Method
Water Absorption (23°C, 24 hr)	< 0.20	%	ISO 62

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	83		ISO 2039-2

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3500	MPa	ISO 527-2/1
Tensile Stress (Break)	66.0	MPa	ISO 527-2/5
Tensile Strain (Break)	2.2	%	ISO 527-2/5
Flexural Stress ¹	101	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength (23°C)	11	kJ/m²	ISO 179/2U

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Annealed)	98.0	°C	ASTM D648
Vicat Softening Temperature
--	108	°C	ISO 306/A50
--	105	°C	ISO 306/B50

Flammability	Nominal Value		Test Method
Flame Rating (1.60 mm)	HB		UL 94

Additional Information	Nominal Value
Designation	Thermoplastics ISO 4894-SAN 2,MRS,105-25

Injection	Nominal Value	Unit
Drying Temperature	80.0	°C
Drying Time	1.0 to 2.0	hr
Processing (Melt) Temp	190 to 250	°C
Mold Temperature	40.0 to 74.9	°C

Note Message
1 .	2.0 mm/min

Resin Grade	Manufacturer	Category	Trademark
Prixene® EB020E20C	POLYMAT	LDPE	Prixene®
AKROTEK® PK-HM GF 15 natural (4707)	AKRO-PLASTIC GmbH	PK-Aliphatic	AKROTEK®
BMC 620X	Bulk Molding Compounds, Inc.	Polyester, TS	BMC
Generic ULDPE	Generic	ULDPE	Generic
KEBATER® PBT BF230	BARLOG plastics GmbH	PBT	KEBATER®