Order Products : sales@su-jiao.com
Nanguang TPU S-72DX
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | Fujian Nanguang Light Industry Co., Ltd. |
| Trademark: | Nanguang TPU |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KhNI4T_Nanguang-TPU-S-72DX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nanguang TPU S-72DX is a Thermoplastic Polyurethane Elastomer product. It can be processed by injection molding and is available in Asia Pacific. |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 to 1.24 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 70 to 74 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 65.0 | mg |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 19.6 | MPa | |
| 300% Strain | 53.9 | MPa | |
| Tensile Strength | 58.8 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 300 | % | ASTM D412 |
| Tear Strength (Split) | 200 | kN/m | ASTM D470 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 | °C | |
| Drying Time | 3.0 to 6.0 | hr | |
| Processing (Melt) Temp | 195 to 215 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Royalene® 400 | Lion Copolymer, LLC | EPDM | Royalene® |
| Lifoflex® UV 70 GB 1070 | ELASTO | SEBS | Lifoflex® |
| Plaskon CMU-870-2C | Cookson Electronics - Semiconductor Products | Epoxy | Plaskon |
| DOW™ HDPE 04852N | The Dow Chemical Company | HDPE | 陶氏高密度聚乙烯 |
| SCHULADUR® A1 GF 30 | A. Schulman Europe | PBT+PET | SCHULADUR® |
