Order Products : sales@su-jiao.com

Techsil® RTV10533

Category:	Silicone Rubber, RTV-1 , Silicone Rubber, RTV-1
Manufacturer:	Techsil Limited
Trademark:	Techsil®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	KcY1NU_TechsilRTV10533.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECHSIL RTV10533 one-component, ready-to-use, adhesive/sealant is a flowable consistency product specially developed for applications where high strength is required. On exposure to atmospheric moisture at room temperature this product cures to a very tough, durable, resilient silicone rubber. TECHSIL RTV10533 utilizes an acetoxy cure system, releasing small amounts of acetic acid vapours from the sealant during cure. Key Performance Properties: One-component, no mixing, easy-to-use Flowable Room temperature condensation cure Very high strength High and low temperature resistance (-60°C to +200°C) Excellent adhesion to silicone rubbers Applications: Bonding silicone HCR gaskets together Seam sealer Bonding silicone coated fabric.

Message

TECHSIL RTV10533 one-component, ready-to-use, adhesive/sealant is a flowable consistency product specially developed for applications where high strength is required. On exposure to atmospheric moisture at room temperature this product cures to a very tough, durable, resilient silicone rubber. TECHSIL RTV10533 utilizes an acetoxy cure system, releasing small amounts of acetic acid vapours from the sealant during cure.

Key Performance Properties:

One-component, no mixing, easy-to-use

Flowable

Room temperature condensation cure

Very high strength

High and low temperature resistance (-60°C to +200°C)

Excellent adhesion to silicone rubbers

Applications:

Bonding silicone HCR gaskets together

Seam sealer

Bonding silicone coated fabric.

General Information
Features	High strength Good liquidity Good adhesion Low temperature resistance Heat resistance, high Durability Good toughness Room temperature vulcanization Elastic
Uses	Sealant Bonding Adhesive
Appearance	Translucent

Physical	Nominal Value	Unit
Density	1.10	g/cm³

Uncured Properties	Nominal Value	Unit
Viscosity (23°C)	180	Pa·s
Tack Free Time	10	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	33
Tensile Strength	7.50	MPa
Tensile Elongation at Break	750	%
Tear Strength	15.0	kN/m

Resin Grade	Manufacturer	Category	Trademark
Prixene® EB020E20	POLYMAT	LDPE	Prixene®
AZDEL™ R401B02N	Azdel, Inc.	PP Alloy	AZDEL™
BIOPLAST® TPS®	BIOTEC GmbH & Co. KG	TP, Unspecified	BIOPLAST®
LNP™ THERMOCOMP™ IF003 compound	SABIC Innovative Plastics	Nylon 612	LNP™ THERMOCOMP™
LEXAN™ EXL4016H resin	SABIC Innovative Plastics	PC	LEXAN™