Order Products : sales@su-jiao.com
Microthene® MP564189
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Microthene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KaiGPQ_Microthene-MP564189.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MICROTHENE MP564189 exhibits good stiffness and low temperature toughness. Typical applications include trash cans, industrial containers, housewares and toys. MP564189 is 16 mesh powder and is also available in pellet form Petrothene GA564189. MP564189 meets the requirements of the Food and Drug Administration 21 CFR 177.1520. This regulation allows the use of this olefin polymer in" ...articles or components or articles intended for use in contact with food." Specific limitations or conditions of use may apply. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Spiral Flow | 32.1 | cm | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 57 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield 1 | 14.0 | MPa | |
| Break | 8.00 | MPa | |
| Tensile Elongation 2(Yield) | 12 | % | ASTM D638 |
| Flexural Modulus 3 | ASTM D790 | ||
| 1% Secant | 440 | MPa | |
| 2% Secant | 380 | MPa |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 45.0 | °C | ASTM D648 |
| Brittleness Temperature | < -76.1 | °C | ASTM D746 |
| Vicat Softening Temperature | 91.0 | °C | ASTM D1525 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 177 | °C | |
| Cylinder Zone 2 Temp. | 190 | °C | |
| Cylinder Zone 3 Temp. | 204 | °C | |
| Cylinder Zone 4 Temp. | 204 | °C |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® 2412GHF6 BRIGHT | Solvay Engineering Plastics | Nylon 66 | TECHNYL® |
| BIOLLOY KH420 | Techno Polymer Co, Ltd. | PLA+ABS | BIOLLOY |
| Arnite® AV2 360 S | DSM Engineering Plastics | PET | Arnite® |
| Cevian®-V VGR30 | Daicel Polymer Ltd. | ABS | Cevian®-V |
| Karina IVORY PVC COMPOUND CAK 35-F | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
