Order Products : sales@su-jiao.com

Santoprene™ 8271-65

Category:	TPV , Thermoplastic Vulcanizate
Manufacturer:	ExxonMobil Chemical
Trademark:	Santoprene™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	KZgHvL_Santoprene-8271-65.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

It is a soft, colorable, special non-hygroscopic thermoplastic vulcanized elastomer (TPV) in the thermoplastic elastomer (TPE) series. It is suitable for non-fat food contact materials. This brand of Shanduping TPV is a shear rate dependent product that can be processed on conventional thermoplastic injection molding or blow molding equipment. This is a polyolefin-based material that can be recycled in the production process.

General Information
Features	Low friction coefficient Lower odor transfer Lower taste transfer Recyclable materials Good coloring Ozone resistance Good chemical resistance Compliance of Food Exposure Low or no water absorption
Uses	Kitchen utensils Large household appliances and small household appliances Non-specific food applications Active hinge Seals Soft handle Food container
Agency Ratings	FDA Food Exposure, Not Rated NSF 51 UL QMFZ2 UL QMFZ8
RoHS Compliance	RoHS compliance
UL File Number	E80017
Appearance	Natural color
Forms	Particle
Processing Method	Blow molding Multiple injection molding Extrusion blow molding Injection blowing molding Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--	0.948	g/cm³	ASTM D792
--	0.950	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shaw A, 15 seconds, 23°C, 2.00mm)	69		ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress - Across Flow (100% Strain, 23°C)	2.70	MPa	ASTM D412, ISO 37
Tensile Strength - Across Flow (Break, 23°C)	6.50	MPa	ASTM D412, ISO 37
Tensile Elongation - Across Flow (Break, 23°C)	470	%	ASTM D412, ISO 37
Tear Strength - Across Flow
23°C ¹	19.0	kN/m	ASTM D624
23°C ²	19	kN/m	ISO 34-1
Compression Set
70°C, 22 hr ³	32	%	ASTM D395B
70°C, 22 hr ⁴	32	%	ISO 815

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air (150°C, 168 hr)	-1.0	%	ASTM D573, ISO 188
Change in Ultimate Elongation in Air (150°C, 168 hr)	-23	%	ASTM D573, ISO 188
Change in Durometer Hardness in Air (Shore A, 150°C, 168 hr)	3.0		ASTM D573, ISO 188

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	-63.0	°C	ASTM D746, ISO 812
RTI Elec	100	°C	UL 746
RTI	85.0	°C	UL 746

Flammability	Nominal Value		Test Method
Flame Rating			UL 94
1.10 mm	HB		UL 94
3.00 mm	HB		UL 94

Additional Information
如果适用，这是基于扇形浇口注塑成型的平板测试结果。拉伸强度、伸长率和拉伸应力沿垂直流动方向测定 - ISO 1 型，ASTM die C。25% 形变时的永久压缩变形。从埃克森美孚欧洲分支机构直接购买的所有产品都符合 REACH 法规。对于埃克森美孚未进口至欧洲的产品，用户应自行评估其是否满足 REACH 法规。

Legal statement
未经埃克森美孚化工书面允许，这种产品包括其产品名称，不得在任何医疗应用领域予以使用或有关详细的产品监管信息，请联系客户服务。

Injection	Nominal Value	Unit
Suggested Max Moisture	0.080	%
Suggested Max Regrind	20	%
Rear Temperature	177 - 191	°C
Middle Temperature	179 - 193	°C
Front Temperature	185 - 199	°C
Nozzle Temperature	185 - 210	°C
Processing (Melt) Temp	143 - 216	°C
Mold Temperature	23.9 - 51.7	°C
Injection Rate	Fast
Back Pressure	0.345 - 0.689	MPa
Screw Speed	100 - 200	rpm
Clamp Tonnage	4.1 - 6.9	kN/cm²
Cushion	3.18 - 6.35	mm
Screw L/D Ratio	16.0:1.0 to 20.0:1.0
Screw Compression Ratio	2.0:1.0 to 2.5:1.0
Vent Depth	0.025	mm

Injection instructions
Santoprene TPV与乙缩醛和PVC不相容。更多关于加工和模具设计的信息，请查阅我们的《注射成型指南》。

Note Message
1 .	C mould
2 .	Method B, right-angle specimen (cut)
3 .	Type 1
4 .	Type a

Resin Grade	Manufacturer	Category	Trademark
Sylvin 6193-89 Natural	Sylvin Technologies Incorporated	PVC, Flexible	Sylvin
Multiuse Leostomer® LE-3140N	Riken Technos Corp.	TPU, Unspecified	Multiuse Leostomer®
Delrin® 500P BK602	DuPont Performance Polymers	Acetal (POM) Homopolymer	Delrin®
Karina CLEAR PVC COMPOUND 80/271-D-AT-IS	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
POLYfill PPC B10075	Polykemi AB	PP Copolymer	POLYfill