Order Products : sales@su-jiao.com
Innothane® FM-2050
| Category: | TSU , Polyurethane Thermoset Elastomer |
| Manufacturer: | Innovative Polymers, Inc. |
| Trademark: | Innothane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KYoB2C_Innothane-FM-2050.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FM-2050 is a rigid polyurethane foam formulated for hand-batch and meter-mix processing. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA, or TDI. This material was built to support models and taxidermy scenery where a white color is required. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | |||
| Cured | 0.0640 to 0.0800 | g/cm³ | |
| Hardener | 1.16 | g/cm³ | |
| Base Resin | 1.20 | g/cm³ |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 83 Mix Ratio by Weight: 80 | ||
| Resin | Mix Ratio by Weight: 100 Mix Ratio by Volume: 100 | ||
| Demold Time | 20 to 30 | min | |
| Cream Time | 40.0 to 60.0 | sec | |
| Rise Time | 2.0 to 2.5 | min | |
| Tack Free Time | 3.0 to 4.0 | min |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Viscosity | |||
| 25°C 1 | 0.10 | Pa·s | |
| 25°C 2 | 0.30 | Pa·s | |
| 25°C 3 | 1.3 | Pa·s | |
| Curing Time (25°C) | 1.7E+2 | hr |
| Note Message | |
|---|---|
| 1 . | Resin |
| 2 . | Mixed |
| 3 . | Hardener |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ravaflex EPDM BLACK | Ravago Group | EPDM | Ravaflex |
| VeroBlackPlus™ RGD875 | Stratasys | Unspecified | VeroBlackPlus™ |
| Andur 8-AP/Curene® 442 | Anderson Development Company | PUR-Ether/TDI | Andur |
| OP - Acetal C-Acetal 25GF | Oxford Polymers | Acetal (POM) Copolymer | OP - Acetal |
| TECHNYL® A 206 NATURAL Z | Solvay Engineering Plastics | Nylon 66 | TECHNYL® |
