Order Products : sales@su-jiao.com

Shin-Etsu Elastomer SV-13500U

Category:	Silicone Rubber, HTV , Silicone Rubber, HTV
Manufacturer:	Shin-Etsu Silicones of America
Trademark:	Shin-Etsu Elastomer
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	KUPr9e_Shin-Etsu-Elastomer-SV-13500U.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SV-13500U is one of a series of easy processing, general purpose silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendaring. This product can be blended with other Shin-Etsu general purpose or no post cure bases for intermediate properties. The choice between these bases will depend on specific requirements. This product can also be extended with extending fillers. Typical Applications Roll covers. Diaphragms.

Message

SV-13500U is one of a series of easy processing, general purpose silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendaring.

This product can be blended with other Shin-Etsu general purpose or no post cure bases for intermediate properties. The choice between these bases will depend on specific requirements. This product can also be extended with extending fillers.

Typical Applications

Roll covers.

Diaphragms.

General Information
Features	Workability, good General
Uses	Diaphragm General
Processing Method	Extrusion Calendering Injection molding

Physical	Nominal Value	Unit
Specific Gravity	1.12	g/cm³

Hardness	Nominal Value	Unit
Durometer Hardness	36

Elastomers	Nominal Value	Unit
Tensile Stress (100% Strain)	0.614	MPa
Tensile Strength	10.3	MPa
Tensile Elongation (Break)	890	%
Tear Strength ¹	26.3	kN/m
Compression Set (177°C, 22 hr)	24	%

Thermoset	Nominal Value	Unit
Post Cure Time (200°C)	4.0	hr

Additional Information	Nominal Value	Unit
Cure Agent	DBPH
Press / Post Cure: Press

Uncured Properties	Nominal Value	Unit
Curing Time	0.17	hr

Note Message
1 .	B mould

Resin Grade	Manufacturer	Category	Trademark
EPO-TEK® H20E-LC	Epoxy Technology Inc.	Epoxy	EPO-TEK®
LNP™ VERTON™ RV007E compound	SABIC Innovative Plastics Europe	Nylon 66	LNP™ VERTON™
Polifil® PP RMT-30	The Plastics Group	PP Impact Copolymer	Polifil® PP
TOTAL Polyethylene Lumicene® Supertough 20ST20	TOTAL Refining & Chemicals	mLLDPE	TOTAL Polyethylene
Aquivion® D79-25BS-Li	Solvay Specialty Polymers	PFSA Lithium Salt	Aquivion®