Order Products : sales@su-jiao.com
Capilene® MT 34 EC
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Carmel Olefins Ltd. |
| Trademark: | Capilene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KTWsYd_Capilene-MT-34-EC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CAPILENE ® MT 34 EC is a special polypropylene designed for high speed extrusion coating and lamination. CAPILENE ® MT 34 EC features: excellent processability, low coating weight, low neck-in, good adhesion to various substrates, high temperature resistance, good moisture barrier and good organoleptic properties. CAPILENE ® MT 34 EC is suitable for: coating and lamination of paper, paperboards, plastic films, woven and nonwoven polypropylene based fabrics. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ISO 1183, ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 25 | g/10 min | ASTM D1238, ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | |||
| -- | 1000 | MPa | ASTM D790 |
| -- 1 | 1000 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 25 | J/m | ASTM D256 |
| 23°C | 3.0 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, not annealed | 80.0 | °C | ASTM D648 |
| 0.45 MPa, not annealed | 65.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 126 | °C | ISO 306/A, ASTM D1525 2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 230 | °C | |
| Cylinder Zone 2 Temp. | 260 | °C | |
| Cylinder Zone 3 Temp. | 280 | °C | |
| Cylinder Zone 4 Temp. | 300 | °C | |
| Cylinder Zone 5 Temp. | 320 | °C | |
| Adapter Temperature | 310 | °C | |
| Melt Temperature | 280 - 330 | °C | |
| Die Temperature | 310 | °C |
| Extrusion instructions |
|---|
| Feed Block Temperature: 310°CA nip distance from die to chill-roll of 150 to 220mm is recommended. |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starex TX-0530T | SAMSUNG SDI CO., LTD. | MABS | Starex |
| TPUCO® TPUE-E98 | Taiwan PU Corporation | TPU-Polyester | TPUCO® |
| AEI SX-0670:CM424 | AEI Compounds Limited | XLPE | AEI |
| KOCETAL® GF706 | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
| Styropek® P 540H | Styropek S.A. de C.V. | PS (EPS) | Styropek® |
