Order Products : sales@su-jiao.com
KRATON® D1163 P
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KSxdAH_KRATON-D1163-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1163 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15%. It is supplied from North America in the physical form identified below.
Kraton D1163 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 23 | g/10 min | |
| Antioxidant Additive 1 | 0.080 to 0.30 | % | Internal Method |
| Ash Content | |||
| PT, Talc | 0.25 to 0.45 | % | Internal Method |
| PTM | 2.5 to 5.0 | % | ISO 247 |
| Polystyrene Content | 13 to 16 | % | Internal Method |
| Solution Viscosity - Toluene, 25%w (25°C) | 900 | mPa·s | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 0.50 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 38.0 | ||
| Styrene/Rubber ratio | 15/85 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 25 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 0.483 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 10.3 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 1400 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Primary antioxidant is a non-staining, phenolic antioxidant. The antioxidant package also contains a non-TNPP secondary antioxidant at a target level of 0.2% wt. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PBT GP2307FG | Sincerity Australia Pty Ltd. | PBT | Sindustris PBT |
| Telcar® GS6531 | Teknor Apex Asia Pacific PTE. LTD. | TPE | Telcar® |
| Hipolyene 8021 MF HF | Zylog Plastalloys | TPO (POE) | Hipolyene |
| Pinnacle PP 5135I3 | Pinnacle Polymers | PP Random Copolymer | Pinnacle PP |
| POCAN® B 3235 000000 | LANXESS GmbH | PBT | POCAN® |
