Order Products : sales@su-jiao.com
Spartech Polycom SC5-2025
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Spartech Polycom |
| Trademark: | Spartech |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KS6r9i_Spartech-Polycom-SC5-2025.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Spartech SC5-2025 is a high viscosity PP copolymer resin for injection/extrusion molding that features excellent process stability, superior toughness, and good impact strength. This product complies with FDA regulations and thus may be safely used in food contact and packaging applications. Polypropylene is a versatile thermoplastic offering a useful balance of heat and chemical resistance, good mechanical and electrical properties and processing ease. PP is resistant to deformation at elevated temperatures and resistant to impact at low temperatures. A very versatile product for a wide variety of applications, Spartech SC5-2025 is recommended for packaging, houseware and consumer product applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.898 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 4.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 26.8 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 1290 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 130 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 100 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.6 | °C | |
| Drying Time | 1.0 | hr | |
| Rear Temperature | 216 - 227 | °C | |
| Middle Temperature | 221 - 232 | °C | |
| Front Temperature | 227 - 238 | °C | |
| Nozzle Temperature | 232 - 243 | °C | |
| Processing (Melt) Temp | 204 - 260 | °C | |
| Mold Temperature | 26.7 - 37.8 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUSTAMID 6G M | Röchling Sustaplast SE & Co. KG | Nylon 6 | SUSTAMID |
| Eleme HIU07060 | Eleme Petrochemical Company Ltd | HDPE | Eleme |
| HIFOR Xtreme® SC74849 | Westlake Chemical Corporation | LLDPE | HIFOR Xtreme® |
| Lucent PC PC/PET-1515 | Lucent Polymers, Inc. | PC+PET | Lucent PC |
| Sylvin 9067-90 BROWN 7108 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
