Order Products : sales@su-jiao.com
Sevrene® 6650-70A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Vi-Chem Corporation |
| Trademark: | Sevrene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KQTkQO_Sevrene-6650-70A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sevrene® 6650-70A is a Thermoplastic Elastomer (TPE) material. It is available in North America. Typical application of Sevrene® 6650-70A: Automotive |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.14 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 71 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 3.90 | MPa | ISO 527-2/300 |
| Tensile Strain (Break) | 460 | % | ISO 527-2/300 |
| Wear Resistance 1 | 6.70 | SAE J948 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Durometer Hardness - A | 3.0 | % | ASTM D573 |
| Change in Tear Strength (80°C) 2 | 10 | % | ISO 188 |
| Thermal | Nominal Value | Test Method | |
|---|---|---|---|
| Bending Test 3 | No Cracking | ASTM D573 | |
| Cold Flexibility (-30°C) | No Cracks |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Fogging 4 | SAE J1756 | ||
| 1 hr | 50 | % | |
| Dry, 16 hr | 89 | % |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Fade Resistance 5 | 4.00 | SAE J1885 | |
| Mass | 6.00 | kg/m² | |
| Odor Rating 6 | SAE J1351 | ||
| Dry | 1.30 | ||
| Wet | 1.00 | ||
| Resistance to H2S 7 | Rating 5 | ||
| Tear Strength | 22.0 | ASTM D624 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (80°C, 1000 hr) | 3.0 | % | ASTM D573 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate 8 | 28 | mm/min | ISO 3795 |
| Note Message | |
|---|---|
| 1 . | 1 kg load, CS#10 Wheel, 1000 cycles |
| 2 . | 1000 hr |
| 3 . | 180° around 1.6 mm rod |
| 4 . | 3 hr @ 100/21°C |
| 5 . | 112 kJ/m² |
| 6 . | FLTN BO 131-01 |
| 7 . | FLTM AN 102-01 |
| 8 . | SAE J369 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 66 GF 20 HI | Plastcom | Nylon 66 | SLOVAMID® 66 |
| Fainplast PVC PK 96 | Fainplast Compounds S.r.l | PVC, Semi-Rigid | Fainplast PVC |
| Sylvin 4200-80 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Geon™ CPVC LC110 | PolyOne Corporation | CPVC | Geon™ CPVC |
| Kepamid® 1315GFH | Korea Engineering Plastics Co., Ltd | Nylon 6 | Kepamid® |
