Order Products : sales@su-jiao.com
SAPYLENE T30HEB
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Sahel Chimie Co. |
| Trademark: | SAPYLENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KNOnFx_SAPYLENE-T30HEB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SAPYLENE T30HEB is a Polypropylene material filled with 30% talc. It is available in Africa & Middle East. Primary attribute of SAPYLENE T30HEB: Non-Toxic. Typical applications include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.14 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 9.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 23°C) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/100 | ||
| Yield | 12.5 | MPa | |
| Break | 2.34 | MPa | |
| Tensile Strain (Break) | 5.3 | % | ISO 527-2/100 |
| Flexural Modulus 1 | 2.14 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 2(23°C) | 7.0 | J/m | ISO 180 |
| Note Message | |
|---|---|
| 1 . | 100 mm/min |
| 2 . | 1A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ravamid® AGF40 NC | Ravago Group | Nylon 66 | Ravamid® |
| Sylvin 2813-70 Grey 9524 | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| Anjacom® 050/65S | Almaak International GmbH | PC+ABS | Anjacom® |
| DENISTAT Y 30G 04 | Vamp Tech | Nylon 66 | DENISTAT |
| Enviramid® N2330THL BK | Ravago Manufacturing Americas, LLC | Nylon 6 | Enviramid® |
