Order Products : sales@su-jiao.com
LNP™ THERMOCOMP™ SF004S compound
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | LNP™ THERMOCOMP™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KMF3I2_LNP-THERMOCOMP-SF004S-compound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP THERMOCOMP SF004S is a compound based on Nylon 12 containing 20% glass fiber. Added feature of this material is: Heat Stabilized. Also known as: LNP* THERMOCOMP* Compound SF-1004 HS Product reorder name: SF004S |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 24 hr | 0.10 to 0.30 | % | |
| Across Flow : 24 hr | 0.80 to 1.0 | % | |
| Water Absorption | |||
| 24 hr, 50% RH | 0.14 | % | ASTM D570 |
| Equilibrium, 23°C, 50% RH | 0.19 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 5410 | MPa | ASTM D638 |
| -- | 5210 | MPa | ISO 527-2/1 |
| Tensile Strength | |||
| Break 2 | 86.0 | MPa | ASTM D638 |
| Break | 80.0 | MPa | ISO 527-2/5 |
| Tensile Elongation | |||
| Break 3 | 2.7 | % | ASTM D638 |
| Break | 2.5 | % | ISO 527-2/5 |
| Flexural Modulus | |||
| 50.0 mm Span 4 | 4600 | MPa | ASTM D790 |
| -- 5 | 4460 | MPa | ISO 178 |
| Flexural Stress | |||
| -- | 116 | MPa | ISO 178 |
| Yield, 50.0 mm Span 6 | 131 | MPa | ASTM D790 |
| Break, 50.0 mm Span 7 | 104 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 87 | J/m | ASTM D256 |
| 23°C 8 | 6.7 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact | |||
| 23°C | 590 | J/m | ASTM D4812 |
| 23°C 9 | 35 | kJ/m² | ISO 180/1U |
| Instrumented Dart Impact | |||
| 23°C, Total Energy | 11.6 | J | ASTM D3763 |
| -- | 4.02 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, 3.20 mm | 176 | °C | ASTM D648 |
| 0.45 MPa, Unannealed, 64.0 mm Span 10 | 170 | °C | ISO 75-2/Bf |
| 1.8 MPa, Unannealed, 3.20 mm | 166 | °C | ASTM D648 |
| 1.8 MPa, Unannealed, 64.0 mm Span 11 | 158 | °C | ISO 75-2/Af |
| CLTE | ASTM D696 | ||
| Flow : -30 to 30°C | 3.9E-5 | cm/cm/°C | |
| Transverse : -30 to 30°C | 1.1E-3 | cm/cm/°C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.12 to 0.20 | % | |
| Rear Temperature | 216 to 227 | °C | |
| Middle Temperature | 221 to 232 | °C | |
| Front Temperature | 227 to 238 | °C | |
| Processing (Melt) Temp | 227 to 238 | °C | |
| Mold Temperature | 71.1 to 82.2 | °C | |
| Back Pressure | 0.172 to 0.344 | MPa | |
| Screw Speed | 30 to 60 | rpm |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | Type I, 5.0 mm/min |
| 3 . | Type I, 5.0 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 2.0 mm/min |
| 6 . | 1.3 mm/min |
| 7 . | 1.3 mm/min |
| 8 . | 80*10*4 |
| 9 . | 80*10*4 |
| 10 . | 80*10*4 mm |
| 11 . | 80*10*4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYsan FL100 F20 | Polykemi AB | SAN | POLYsan |
| NEFTEKHIM PE 4020W (20425) | Nizhnekamskneftekhim Inc. | LLDPE | NEFTEKHIM PE |
| Bayfill® EA 6004 (5 pcf) | Covestro - PUR | PUR-Ether/MDI | Bayfill® |
| Lushan EJ-1 | Guangzhou Lushan New Materials Co., Ltd | HDPE | Lushan |
| MAJORIS FN068 - 8139 | AD majoris | PP Copolymer | MAJORIS |
