Order Products : sales@su-jiao.com

Biograde BL-F

Category:	Biodeg Polymers , Biodegradable Polymers
Manufacturer:	Biograde Group of Companies
Trademark:	Biograde
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	KL6v94_Biograde-BL-F.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Starch based masterbatch for film or blow moulded applications where sustainability is required but biodegradability is not. Blendable with LDPE, LLDPE and HDPE resin. Used for thin and thick gauge film applications. BIOGRADE BL-F masterbatch is a based on a blend of thermoplastic starch (TPS) with PE/PP. This blendable grade is compatibilised to offer a high level of mechanical strength, outstanding elongation properties and toughness. The resin is based on corn starch which is a renewable material. This thermoplastic starch PE masterbatch can be blended with polyethylene to give controlled lifetime material where degradation time over 1 year are required. Applications Shopping bags/Check-out bags Garbage bags Leaf litter bags Bin liners Overwrap Packaging Disposable or industrial bottles

Message

Starch based masterbatch for film or blow moulded applications where sustainability is required but biodegradability is not.

Blendable with LDPE, LLDPE and HDPE resin.

Used for thin and thick gauge film applications.

BIOGRADE BL-F masterbatch is a based on a blend of thermoplastic starch (TPS) with PE/PP. This blendable grade is compatibilised to offer a high level of mechanical strength, outstanding elongation properties and toughness. The resin is based on corn starch which is a renewable material. This thermoplastic starch PE masterbatch can be blended with polyethylene to give controlled lifetime material where degradation time over 1 year are required.

Applications

Shopping bags/Check-out bags

Garbage bags

Leaf litter bags

Bin liners

Overwrap Packaging

Disposable or industrial bottles

General Information
Features	Biodegradable Good Toughness High Elongation High Strength Renewable Resource Content
Uses	Bags Blending Blow Molding Applications Bottles Film Liners Packaging
Forms	Pellets
Processing Method	Blown Film

Physical	Nominal Value	Unit	Test Method
Density	1.15	g/cm³	ASTM D4883
Melt Mass-Flow Rate (MFR) (150°C/5.0 kg)	2.9	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹			ASTM D883
Yield	10.0	MPa
Break	> 10.0	MPa
Tensile Elongation ²(Break)	> 500	%	ASTM D883

Thermal	Nominal Value	Unit	Test Method
Peak Melting Temperature	90.0 to 100	°C	ASTM D3418

Additional Information	Nominal Value	Unit
Blown Film Melt Temperature	100 to 160	°C

Note Message
1 .	Above tensile properties based on 80% BLF in LDPE
2 .	Above tensile properties based on 80% BLF in LDPE

Resin Grade	Manufacturer	Category	Trademark
RTP 1483 N	RTP Company	PESU	RTP
RTP 2200 LF AR 15 TFE 10	RTP Company	PEEK	RTP
Nipol® LX407BP	Zeon Corporation	Latex	Nipol®
AKROMID® B3 GF 45 1 black (3446)	AKRO-PLASTIC GmbH	Nylon 6	AKROMID®
Hanwha Total PE R908P	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	HDPE	Hanwha Total PE