Order Products : sales@su-jiao.com
Optema™ TC 120 Molding
| Category: | EMA , Ethylene Methyl Acrylate Copolymer Resin |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | Optema™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KI6pwS_Optema-TC-120-Molding.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| OPTEMA TC 120 is an ethylene-methyl acrylate copolymer, which can be used as an impact modifier or compatibilizer for polymer mixtures. TC 120 are processed by typical low density polyethylene granulation equipment at 625 °F. |
| General Information | |
|---|---|
| Additive |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Methyl Acrylate Content | 21.5 | wt% | ExxonMobil Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A, 15 seconds | 75 | ASTM D2240 | |
| Shaw D, 15 seconds | 28 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 5.86 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 800 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 32.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Instrumented Dart Impact | ASTM D3763 | ||
| -40°C | 28.5 | J | ASTM D3763 |
| 23°C | 17.6 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 48.0 | °C | ASTM D1525 |
| Legal statement |
|---|
| 本产品不宜在医疗应用中使用，亦不应在任何此类应用中使用有关潜在食品接触应用合规信息（例如：FDA、EU、HPFB），请与埃克森美孚化工客户服务代表联系。 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VESTAMID® Care ML16 | Evonik Industries AG | Nylon 12 | VESTAMID® Care |
| Mylar® WC (48 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| AIE PA66 6010F | Asia International Enterprise (Hong Kong) Limited | Nylon 66 | AIE PA66 |
| Kareline® ABMS6040 | Plasthill Oy | ABS | Kareline® |
| LNP™ LUBRICOMP™ Noryl_SPN422L compound | SABIC Innovative Plastics | PPE+PS | LNP™ LUBRICOMP™ |
