Order Products : sales@su-jiao.com
Dryflex® A2 500350
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KHDX4c_DryflexA2500350.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex A2 500350: Thermoplastic Elastomer Material Type: TPS-SEBS Hardness: 35 Shore A (4mm) Service Temperature Range: -50 -- +125°C (unstressed material) Colour: Opaque/White, but the base material can be available in any colour. Presentation: Free flowing pellets that can be processed without predrying, when stored under normal conditions. Weather Resistance: Good Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recyclability: 100% recyclable Special Features The material Shows good adhesion onto PC/ABS, PC and ABS |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 25 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 4.00 mm) | 35 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ASTM D638 | ||
| 100% secant | 1.00 | MPa | ASTM D638 |
| 300% secant | 2.00 | MPa | ASTM D638 |
| Tensile Strength | 3.00 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 550 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 16.0 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature - Unstressed Material | -50 - 125 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 210 - 250 | °C | |
| Middle Temperature | 210 - 250 | °C | |
| Front Temperature | 210 - 250 | °C | |
| Mold Temperature | 30 - 60 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 210 - 250 | °C | |
| Cylinder Zone 2 Temp. | 210 - 250 | °C | |
| Cylinder Zone 3 Temp. | 210 - 250 | °C | |
| Cylinder Zone 4 Temp. | 210 - 250 | °C | |
| Cylinder Zone 5 Temp. | 210 - 250 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wellamid® GF33-66/6 XE-BKDX9 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| FHR EPS 55-6455 | Flint Hills Resources, LP | PS (EPS) | FHR EPS |
| Hylon® N2243HL | Ravago Manufacturing Americas, LLC | Nylon 6 | Hylon® |
| TechnoElast S A5002 I 1 nat | TechnoCompound GmbH | TPE | TechnoElast |
| Sylvin 916VO Green 3163 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
