Dryflex® 502600S

Category: SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer: ELASTO
Trademark: Dryflex®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: KDyLgW_Dryflex-502600S.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
General Information
Features
  • Bondability
  • Food Contact Acceptable
  • Good Chemical Resistance
  • Good Weather Resistance
  • Scratch Resistant
Appearance
  • Black
PhysicalNominal ValueUnitTest Method
Specific Gravity 0.890g/cm³ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)2.0g/10 minASTM D1238
Molding Shrinkage 0.80 to 2.0%
HardnessNominal ValueUnitTest Method
Durometer Hardness (Shore A)60ASTM D2240
MechanicalNominal ValueUnitTest Method
Tensile Strength ASTM D638
    -- 7.00MPa
    100% Strain 2.00MPa
    300% Strain 3.00MPa
Tensile Elongation (Break)> 600%ASTM D638
ElastomersNominal ValueUnitTest Method
Tear Strength 25.0kN/mASTM D624
Compression Set (23°C, 72 hr)20%ASTM D395
ThermalNominal ValueUnit
Service Temperature -50 to 125°C
InjectionNominal ValueUnit
Processing (Melt) Temp 180 to 210°C
Resin Grade Manufacturer Category Trademark
QR Resin QR-4100-GF30 QTR, Inc. PPE+PS QR Resin
Abstron IM17A DLW Bhansali Engineering Polymers Limited ABS Abstron
AMTOPP HD18 Inteplast Group PP, Unspecified AMTOPP
Elexar® EL-1446A Teknor Apex Company TPE Elexar®
Rotuba CAP CP808 (9% Plasticizer) Rotuba Extruders, Inc. CAP Rotuba CAP