Order Products : sales@su-jiao.com

ISPLEN® PP 034 W3F

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	REPSOL
Trademark:	ISPLEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	KDixNy_ISPLEN-PP-034-W3F.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Isplen® PP 034 W3F is a medium melt flow rate polypropylene homopolymer specially formulated and adapted for bioriented film extrusion (BOPP). The product is suitable for metallizable film. Rheological properties enhance orientation and give it very high break resistance in the melt, meaning that it behaves ideally during subsequent treatment. It is extremely pure and has an excellent thermal stability. It´s optical, mechanical and barrier properties are very good. It can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer. TYPICAL APPLICATIONS In extrusion processes such as: Bi-oriented film BOPP manufactured using the tenter process. High tenacity staple yarn Low thickness sheet extrusion Recommended melt temperature range from 210 to 250°C. Processing conditions should be optimised for each production line.

Message

Isplen® PP 034 W3F is a medium melt flow rate polypropylene homopolymer specially formulated and adapted for bioriented film extrusion (BOPP). The product is suitable for metallizable film.
Rheological properties enhance orientation and give it very high break resistance in the melt, meaning that it behaves ideally during subsequent treatment.
It is extremely pure and has an excellent thermal stability. It´s optical, mechanical and barrier properties are very good.
It can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer.

TYPICAL APPLICATIONS
In extrusion processes such as:

Bi-oriented film BOPP manufactured using the tenter process.

High tenacity staple yarn

Low thickness sheet extrusion

Recommended melt temperature range from 210 to 250°C. Processing conditions should be optimised for each production line.

General Information
Features	Barrier Resin Food Contact Acceptable Good Colorability Good Melt Strength Good Thermal Stability Medium Flow
Uses	BCF Yarn Bi-axially Oriented Film Film Sheet
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Film Extrusion Sheet Extrusion Tenter Process

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	2.1	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	35.0	MPa	ISO 527-2
Flexural Modulus	1300	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	91.0	°C	ISO 75-2/B
Vicat Softening Temperature	152	°C	ISO 306/A

Extrusion	Nominal Value	Unit
Melt Temperature	210 to 250	°C

Resin Grade	Manufacturer	Category	Trademark
Sevrene® 3000-70A	Vi-Chem Corporation	TPE	Sevrene®
Eltex® HD3930UA	INEOS Olefins & Polymers Europe	LMDPE	Eltex®
K-Resin® SBC XK41	Chevron Phillips Chemical Company LLC	SBC	K-Resin® SBC
Infino HT-8200G	SAMSUNG SDI CO., LTD.	Nylon+PPE	Infino
LNP™ LUBRICOMP™ RP003 compound	SABIC Innovative Plastics	Nylon 66	LNP™ LUBRICOMP™