Category: | PPA , Polyphthalamide |
Manufacturer: | RTP Company |
Trademark: | RTP |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | KBg6FF_RTP-4000-AR-20.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
General Information | |
---|---|
Filler / Reinforcement |
|
RoHS Compliance |
|
Appearance |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 1.26 | g/cm³ | ASTM D792 |
Molding Shrinkage - Flow (3.18 mm) | 1.1 | % | ASTM D955 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Modulus | 4830 | MPa | ASTM D638 |
Tensile Strength | 75.8 | MPa | ASTM D638 |
Tensile Elongation (Break) | 1.8 | % | ASTM D638 |
Flexural Modulus | 4480 | MPa | ASTM D790 |
Flexural Strength | 138 | MPa | ASTM D790 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact (3.18 mm) | 21 | J/m | ASTM D256 |
Unnotched Izod Impact (3.18 mm) | 240 | J/m | ASTM D4812 |
Injection | Nominal Value | Unit | |
---|---|---|---|
Rear Temperature | 304 to 343 | °C | |
Middle Temperature | 304 to 343 | °C | |
Front Temperature | 304 to 343 | °C | |
Mold Temperature | 121 to 163 | °C | |
Injection Pressure | 68.9 to 103 | MPa |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Mediprene® A2 500450M | ELASTO | SEBS | Mediprene® |
RheTech Thermoplastic Polyolefin FT3080-425 | RheTech, Inc. | Polyolefin, Unspecified | RheTech Thermoplastic Polyolefin |
Versaflex™ 9555-1 | PolyOne Corporation | TPE | Versaflex™ |
Geon™ Vinyl Wire & Cable WR8180L | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Wire & Cable |
ExxonMobil™ LDPE LD 165BW1 | ExxonMobil Chemical | LDPE | ExxonMobil™ LDPE |