Order Products : sales@su-jiao.com

Extir® B 3000 AE

Category:	PS (EPS) , Expanded Polystyrene
Manufacturer:	Versalis S.p.A.
Trademark:	Extir®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	KBbTBB_Extir-B-3000-AE.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Extir B 3000 AE is a flame retardant expandable polystyrene in the form of spherical beads of medium particle size, containing pentane as blowing agent. Extir does not contain CFC or HCFC. This grade is characterised by fast moulding cycles, good fusion and low energy needs combined with a high mechanical strength and a good surface finishing. Extir B 3000 AE is used for production of shaped mouldings with section greater than 8 mm or medium-high density blocks. Extir B 3000 AE is used mainly in building and industrial packaging applications where, for legislative or safety reasons, the use of a flame retardant material is required. Extir B 3000 AE is also suitable for the production of skin moulded items. Typical applications are: industrial packaging (e.g. cathode ray tube protection) medium-high density blocks for thermal insulation moulded panels for underfloor heating moulded, insulating drainage panels moulded or block-cut building components

Message

Extir B 3000 AE is a flame retardant expandable polystyrene in the form of spherical beads of medium particle size, containing pentane as blowing agent. Extir does not contain CFC or HCFC.
This grade is characterised by fast moulding cycles, good fusion and low energy needs combined with a high mechanical strength and a good surface finishing. Extir B 3000 AE is used for production of shaped mouldings with section greater than 8 mm or medium-high density blocks.

Extir B 3000 AE is used mainly in building and industrial packaging applications where, for legislative or safety reasons, the use of a flame retardant material is required. Extir B 3000 AE is also suitable for the production of skin moulded items.

Typical applications are:

industrial packaging (e.g. cathode ray tube protection)

medium-high density blocks for thermal insulation

moulded panels for underfloor heating

moulded, insulating drainage panels

moulded or block-cut building components

General Information
Additive	Blowing Agent 2 Flame Retardant
Features	Expandable Fast Molding Cycle Flame Retardant Good Surface Finish High Strength
Uses	Industrial Applications Packaging Reinforced Panels
Agency Ratings	DIN 4102/B1
Forms	Spheres

Physical	Nominal Value	Unit
Density	0.0180 to 0.0350	g/cm³
Apparent Density
-- ¹	0.02	g/cm³
--	0.59 to 0.63	g/cm³
Particle Size	600 to 1000	µm

Note Message
1 .	on a continuous pre-expander after one expansion

Resin Grade	Manufacturer	Category	Trademark
TAISOX 7360M	Formosa Plastics Corporation	EVA	TAISOX
VICTREX® PEEK 650G	Victrex plc	PEEK	VICTREX® PEEK
Addisil™ IND 1080 E	Momentive Performance Materials Inc.	Rubber	Addisil™
LNP™ LUBRILOY™ D2000AXH compound	SABIC Innovative Plastics	PC	LNP™ LUBRILOY™
Petrotene® PP A3 T40 PRTA011 PH359	Petropol Industry and Trade of Polymers LTDA	PP Homopolymer	Petrotene® PP