Order Products : sales@su-jiao.com
Flexathene® TP4346HS
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Flexathene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | K64gvx_Flexathene-TP4346HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FLEXATHENE TP 4346-HS, formerly known as PD 765, is a high stiffness, paintable thermoplastic polyolefin (TPO) specially formulated for thin-wall automotive exterior applications requiring a balance of high impact resistance especially at cold temperatures. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 17 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 13.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 4.8 | % | ASTM D638 |
| Flexural Modulus | |||
| 1% secant 1 | 1030 | MPa | ASTM D790B |
| Tangent | 1080 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -18°C | 53 | J/m | ASTM D256 |
| 23°C | 640 | J/m | ASTM D256 |
| Instrumented Dart Impact | ASTM D3763 | ||
| -30°C | 40.7 | J | ASTM D3763 |
| -18°C | 42.0 | J | ASTM D3763 |
| Dart Drop Impact (-18°C) | 45.2 | J | ASTM D3029 |
| Additional Information |
|---|
| Multi-axial Impact at Max load, ASTM D3763, -18°C: 698 lbsMulti-axial Impact at Failure Mode, ASTM D3763, -18°C: DuctileMulti-axial Impact at Max load, ASTM D3763, -30°C: 659 lbsMulti-axial Impact at Failure Mode, ASTM D3763, -30°C: DuctilePaint Retention, GM9071P Method A, Cross Hatch Tape: 100 % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 221 - 243 | °C |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TES J-4/30/V0 RD6922 | Techmer Engineered Solutions | Nylon 612 | TES |
| Anjatech® R300E | Almaak International GmbH | Nylon 66 | Anjatech® |
| Geon™ Vinyl Flexible 90037 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| Laprene® 83FM00A84 | SO.F.TER. SPA | SEBS | Laprene® |
| Sylvin 4200-85 White 1515 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
