Order Products : sales@su-jiao.com
Devcon 5 Minute® Epoxy
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Devcon |
| Trademark: | Devcon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | K5c5C1_Devcon-5-Minute-Epoxy.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
A rapid-curing, general purpose adhesive/encapsulant. Intended Use:
Product features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Volume | 0.907 | cm³/g | |
| Solid content- by Volume | 100 | % |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Impact Resistance | 11.6 | kJ/m² |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature - Dry | -40 - 93 | °C |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Work Time | 3.0 - 6.0 | min |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Shear Adhesion | 13.1 | MPa | ASTM D1002 |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 1.10 | g/cm³ |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Elongation (Break) | 1.0 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 19 | kV/mm | ASTM D149 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Component a | Mixing ratio by weight: 1.0 Mixing ratio by capacity: 1.0 | ||
| Component B | Mixing ratio by weight: 1.0 Mixing ratio by capacity: 1.0 | ||
| Thermoset Mix Viscosity | 10000 | cP |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cured 7 days @ 75°F |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Curing Time (22°C) | 12 | hr |
| Note Message | |
|---|---|
| 1 . | Mixed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toppyl SP 2001 B | LyondellBasell Industries | Polyolefin, Unspecified | Toppyl |
| NEXT SIGNATURE PA6 G33-100 | NEXT Specialty Resins, Inc. | Nylon 6 | NEXT SIGNATURE |
| Fainplast PVC GSK 9130/UV | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| HiFill® PA6/6 GB40 HS BK | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| ALTECH® PP-H ECO 2030/552 GF30 | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® PP-H |
