Order Products : sales@su-jiao.com
Glastherm® HT
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Glastic Corporation |
| Trademark: | Glastherm® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | K2lT9l_Glastherm-HT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GlasTherm Grade HT is a high compressive strength, heat-resistant composite material. Finished to a close thickness tolerance, it is ideal for insulation between the fold and the press or within the mold itself. It is completely asbestos-free and rugged to withstand rough handling during installation. It is easily cut and machined with standard metal working equipment. Diamond cutting tools are recommended for long life. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.97 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Strength (Yield) | 214 | MPa | ASTM D790 |
| Compressive Strength | ASTM D695 | ||
| 150°C | 186 | MPa | ASTM D695 |
| 24°C | 338 | MPa | ASTM D695 |
| 288°C | 117 | MPa | ASTM D695 |
| 200°C | 124 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 430 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Linear thermal expansion coefficient | ASTM D696 | ||
| Flow | 2.2E-5 | cm/cm/°C | ASTM D696 |
| Lateral | 1.2E-4 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.27 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1(in Air) | 2.0 | kV/mm | ASTM D149 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (23.9 mm) | HB | UL 94 |
| Additional Information |
|---|
| Maximum Service Temperature: 550°FThickness Tolerance: .002 inches |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8687-55 Yellow 4166 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Next PC CX-02NC | Next Polymers Ltd. | PC | Next PC |
| Bayblend® FR3006 HF | Covestro - Polycarbonates | PC+ABS | Bayblend® |
| CP PRYME® ABS A200-29 Black | Chase Plastics Services Inc. | ABS | CP PRYME® ABS |
| LEXAN™ OQ4320R resin | SABIC Innovative Plastics | PC | LEXAN™ |
