Order Products : sales@su-jiao.com
ELEVATE™ EF526
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | ELEVATE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | K2GVwi_ELEVATE-EF526.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Westlake ELEVATE™ EF526AA is an ethylene vinyl acetate copolymer with 16% VA. EF526AA is designed for cast film, extrusion coatings, and thermal laminations. Application/Uses: Extrusion Coatings Thermal Laminations Cast Film |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.936 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 15 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 16.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec, Compression Molded) | 41 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 10.7 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 590 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 62.1 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 65.0 | °C | Internal method |
| Peak Melting Temperature | 79.0 | °C | ASTM D3418 |
| Additional Information |
|---|
| AA formulation contains no slip and no antiblock. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYMAN® (ABS) E/HI | A. Schulman Europe | ABS | POLYMAN® |
| S&E Wire & Cable GTPE-2272ALC | S&E Specialty Polymers, LLC | TPE | S&E Wire & Cable |
| Starflam PF0023E | Eurostar Engineering Plastics | Nylon 6 | Starflam |
| LNP™ THERMOCOMP™ DX10313 compound | SABIC Innovative Plastics Asia Pacific | PC | LNP™ THERMOCOMP™ |
| OmniLon™ PA6/6 GR35 NHFR0 HS | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
