Order Products : sales@su-jiao.com

Stamylex® 5119 S

Category:	MDPE , Medium Density Polyethylene
Manufacturer:	Borealis AG
Trademark:	Stamylex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	K09B53_Stamylex-5119-S.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Stamylex® 5119 S is a medium density linear polyethylene produced in a solution polymerisation process using a Ziegler - Natta catalyst. This grade contains an additive package for thermal stabilization and a processing aid. Features: good flow properties mechanical properties narrow additive tolerances Stamylex 5119 S is suited for use in caps of non-carbonated mineral water bottles, afforded by good closing properties, unscrewing torque and organoleptic properties. The material is designed for trouble-free operation on fast bottle filling lines.

Message

Stamylex® 5119 S is a medium density linear polyethylene produced in a solution polymerisation process using a Ziegler - Natta catalyst. This grade contains an additive package for
thermal stabilization and a processing aid.

Features:

good flow properties

mechanical properties

narrow additive tolerances

Stamylex 5119 S is suited for use in caps of non-carbonated mineral water bottles, afforded by good closing properties, unscrewing torque and organoleptic properties.
The material is designed for trouble-free operation on fast bottle filling lines.

General Information
Additive	Heat Stabilizer Processing Aid
Features	Good Flow Good Organoleptic Properties Medium Density
Uses	Bottles

Physical	Nominal Value	Unit	Test Method
Density (23°C)	0.944	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.1	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	57		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	700	MPa	ISO 527-2
Tensile Stress (Break)	12.0	MPa	ISO 527-2/500
Tensile Strain (Break)	40	%	ISO 527-2/500

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength (23°C)	3.7	kJ/m²	ISO 180/1A

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	115	°C	ISO 306/A
Melting Temperature	125	°C	ASTM D3418

Resin Grade	Manufacturer	Category	Trademark
RTP 1205-80D TFE 20	RTP Company	TPU-Polyester	RTP
VITAMIDE® AR36GY6581	Jackdaw Polymers	Nylon 66	VITAMIDE®
Crastin® FGS600F10 NC010	DuPont Performance Polymers	PBT	Crastin®
DOMAMID® A1-506-V15-I1-N	DOMO Engineering Plastics GmbH	Nylon 6	DOMAMID®
Plaslube® PA6 CF30 TL15 BK	Techmer Engineered Solutions	Nylon 6	Plaslube®