Order Products : sales@su-jiao.com
Kemcor LDX 438
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Kemcor |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IzxWQA_Kemcor-LDX-438.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This grade is approved by Telecom Australia for use in telecommunication cables and meets the following raw material specifications: AS 1049 - 1986, Type 03SC ASTM D 1248 IC, Grade J4, W2 BS6234 - 1987, Type 03C |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.934 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.60 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 16.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 600 | % | ASTM D638 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (1 MHz) | 2.60 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 1.0E-3 | ASTM D150 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mylar® J (390 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| BJB Silicone TC-5050 A/B | BJB Enterprises, Inc. | Silicone | BJB Silicone |
| ALTECH® NXT PP-B A 2035/450 GF35 CP | ALBIS PLASTIC GmbH | PP Copolymer | ALTECH® NXT PP-B |
| Grivory® GV-4H | EMS-GRIVORY | Nylon 66+Nylon 6I/X | Grivory® |
| LEXAN™ LS2 resin | SABIC Innovative Plastics | PC | LEXAN™ |
