Monprene® OM-12265-01 (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene OM-12265-01 is a specialty thermoplastic elastomer designed for overmolding applications like grips and anti-skid parts for consumer and industrial products. Monprene OM-12265-01 is a medium hardness, low density, UV stabilized grade that exhibits excellent adhesion to PC, ABS, and PC/ABS.

General Information
Features	Low Specific Gravity Low density smoothness Light stabilization Good UV resistance Adhesiveness Good formability Good adhesion Medium liquidity Lubrication Medium hardness
Uses	Handle overmolding Electrical appliances Power/other tools Soft handle Mobile phone Sporting goods Stationery Rubber substitution Knob Bonding
RoHS Compliance	RoHS compliance
Appearance	Translucent Natural color
Forms	Particle
Processing Method	Multiple injection molding Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.958	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 1 second, injection molding	68	ASTM D2240
Shore A, 5 seconds, injection molding	66	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Break)	6.21	MPa	ASTM D412
Tensile Elongation (Break)	600	%	ASTM D412

Additional Information	Nominal Value
Adhesion to ABS
Adhesion to PC
Adhesion to PC/ABS

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Drying Temperature	60	°C
Drying Time	2.0 - 4.0	hr
Rear Temperature	188 - 216	°C
Middle Temperature	188 - 216	°C
Front Temperature	188 - 216	°C
Nozzle Temperature	188 - 216	°C
Processing (Melt) Temp	188 - 216	°C
Mold Temperature	16 - 32	°C
Injection Pressure	1.38 - 5.52	MPa
Back Pressure	0.172 - 0.862	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Moisture can degrade the material. Drying is suggested. This can be accomplished by placing the material in a desiccant dryer for 2 to 4 hours at 140°F.

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	IzsbhW_MonpreneOM1226501PRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Manner Flexible PVC V738A	Manner Plastics, L.P.	PVC, Flexible	Manner Flexible PVC
Vi-Chem PVC VNC101E	Vi-Chem Corporation	PVC, Unspecified	Vi-Chem PVC
Fainplast PVC PH 77/AF	Fainplast Compounds S.r.l	PVC, Flexible	Fainplast PVC
Lucky Enpla LKFR	Lucky Enpla Co LTD	ABS	Lucky Enpla
PMC® 121-30	Smooth-On, Inc	PUR, Unspecified	PMC®