Order Products : sales@su-jiao.com
Geon™ Duracap™ L4605 Red 7640
| Category: | PVC, Semi-Rigid , Semi-Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Duracap™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IyedrG_Geon-Duracap-L4605-Red-7640.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon™ Duracap™ L4605 Red 7640 is a Semi-Rigid Polyvinyl Chloride product. It can be processed by coextrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Geon™ Duracap™ L4605 Red 7640 include capstock and outdoor applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 74 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 1820 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 23.8 | MPa | ASTM D638 |
| Flexural Modulus 3 | 1730 | MPa | ASTM D790 |
| Flexural Strength 4(Yield) | 50.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm, Compression Molded) | 40 | J/m | ASTM D256 |
| Drop Impact Resistance | ASTM D4226 | ||
| 23°C, extruded profile 5 | 70.3 | J/cm | |
| 23°C 6 | 72.1 | J/cm |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.18 mm | 41.1 | °C | |
| 0.45 MPa, Annealed, 3.18 mm | 43.9 | °C | |
| 1.8 MPa, Unannealed, 3.18 mm | 36.1 | °C | |
| 1.8 MPa, Annealed, 3.18 mm | 36.1 | °C | |
| CLTE - Flow | 7.3E-5 | cm/cm/°C | ASTM D696 |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Gardner Gloss (60°) | 5 to 30 | ASTM D523 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 182 to 193 | °C |
| Note Message | |
|---|---|
| 1 . | 5.1 mm/min |
| 2 . | 5.1 mm/min |
| 3 . | 13 mm/min |
| 4 . | 13 mm/min |
| 5 . | Procedure A, C.125 |
| 6 . | Procedure B, C.125 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ROPOTEN® KB-02-208 | LUKOIL Bulgaria Ltd. | LDPE | ROPOTEN® |
| ALKAMIX™ MB6005 | Qenos Pty Ltd | LLDPE | ALKAMIX™ |
| BUP 624 | Bonyan Kala Chemie Company | Polyester, TS | BUP |
| Generic PBT | Generic | PBT | Generic |
| Eltex® P HEY500 | INEOS Olefins & Polymers Europe | PP+PE | Eltex® P |
