Order Products : sales@su-jiao.com
TEREZ PA 6.6 7600 UV
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | TER HELL PLASTIC GMBH |
| Trademark: | TEREZ PA 6.6 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Iy25uf_TEREZ-PA-6-6-7600-UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Medium viscosity Polyamide 6.6 with good flowability, good impact resistance, bright natural colour and UV-stabilizer. For long flow distances, short moulding cycles with good demoldability. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.14 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3600 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 4.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 6.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | No Break | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 230 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 85.0 | °C | ISO 75-2/A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® Vestolen A 5061 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® Vestolen A |
| TEDUR® L 9560-3 S | ALBIS PLASTIC GmbH | PPS | TEDUR® |
| Tarnoform® 500 GF6 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| Escorene™ Ultra LD 713.93 Molding | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| PLUSTEK PB825G5 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
