Order Products : sales@su-jiao.com
KRATON® D1155 E
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IwvMT8_KRATON-D1155-E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1155 E is a clear linear block copolymer based on styrene and butadiene, with bound styrene of 40% mass. It is supplied from Europe in the physical form identified below.
Kraton D1155 E is used in the modification of polymers and in compounds for technical and footwear applications. It is also used in formulating adhesives, sealants and coatings and as a modifier for bitumen. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 6.0 to 15 | g/10 min | ASTM D1238 |
| Solution Viscosity 1 | 700 | mPa·s | Internal Method |
| Bound Styrene | 37.0 to 43.0 | % | Internal Method |
| Antioxidant Additive 2 | > 0.15 | % | Internal Method |
| Volatile Matter | 0.10 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 74 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 28.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 800 | % | ISO 37 |
| Note Message | |
|---|---|
| 1 . | Measured on 25% mass solution in toluene at 25°C using a Brookfield viscometer, LTF or LTV model |
| 2 . | Primary phenolic antioxidant |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimaFlex® SAN 0750-BT | Plastic Solutions, Inc. | SAN | PrimaFlex® |
| Retpol® PDR 7408/2 UV3 | PolyPacific Pty. Ltd. | PP, Unspecified | Retpol® |
| SHIN-A SEN-0231MPM75 | SHIN-A T&C | Epoxy | SHIN-A |
| ALTECH® PA6 B 1000/209 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| LNP™ LUBRICOMP™ RFL33 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
