Order Products : sales@su-jiao.com
Softflex® 2910
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Softflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IwXTn2_Softflex-2910.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Softflex® 2910 is a Thermoplastic Elastomer (TPE) product. It is available in North America. Typical application: Engineering/Industrial Parts. |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(200°C/5.0 kg) | 0.30 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 3.18 mm | 0.80 | % | |
| Across Flow : 3.18 mm | 0.80 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 91 | ||
| Shore A, 10 sec | 85 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-22 Wheel) | 241 | mg | ASTM D3389 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peel Strength - 90° | 1.1 | kN/m | ASTM D429 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Overmold Bonding | ABS, PC, ABS/PC, PPO |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (100% Strain) | 4 | % | ASTM D412 |
| Tensile Stress | ASTM D412 | ||
| 50% Strain | 1.50 | MPa | |
| 100% Strain | 1.99 | MPa | |
| 300% Strain | 3.36 | MPa | |
| Tensile Strength 2(Yield) | 11.3 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 870 | % | ASTM D412 |
| Tear Strength | 44.8 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 23°C, 22 hr | 39 | % | |
| 70°C, 22 hr | 96 | % | |
| 100°C, 22 hr | 98 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Impact (23°C) | 31.6 | J | ASTM D5420 |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Zetpol® 1010 | Zeon Corporation | NBR | Zetpol® |
| CarboSil™ 20 55D | DSM Biomedical Inc. | TPU-PC | CarboSil™ |
| Desmopan® 786 E | Covestro - PUR | TPU, Unspecified | Desmopan® |
| Generic PVC, Rigid | Generic | PVC, Rigid | Generic |
| Latamid 66 H2 G/50-V0HF1 | LATI S.p.A. | Nylon 66 | Latamid |
