Order Products : sales@su-jiao.com
NYCOA Polyamide 1595 HS
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Nycoa (Nylon Corporation of America) |
| Trademark: | NYCOA Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IwVfDL_NYCOA-Polyamide-1595-HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NYCOA 1595 HS is a medium viscosity Nylon 6 resin, which offers superior flexibility and toughness in both molding and extrusion applications. Its high melt viscosity and strength provides excellent processability and yields extremely tough and resilient finished articles. Injection molding of high strength parts can be accomplished with molding cycles almost equivalent to those obtained with general-purpose grade resins, even though higher cylinder temperatures may sometimes be required. NYCOA 1595 HS resin has acceptance in diversified applications from convoluted tubing, windshield washer tubing, profile, to tough molded articles. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (235°C/1.0 kg) | 2.5 | g/10 min | ASTM D1238 |
| Water Absorption (24 hr) | 1.7 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 52.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 75 | % | ASTM D638 |
| Flexural Modulus 3 | 1600 | MPa | ASTM D790 |
| Flexural Strength 4 | 60.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.35 mm) | 500 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 220 | °C | DSC |
| Additional Information |
|---|
| The value listed as Melt Point DCS was tested in accordance with ASTM D789. |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 51 mm/min |
| 4 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROMID B 280 G10 | Taro Plast S.p.A. | Nylon 6 | TAROMID B |
| UBESTA 3030 JI9L | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| HiFill® PS GF20 | Techmer Engineered Solutions | PS (GPPS) | HiFill® |
| Keliren® CPE135C | Hangzhou Keli Chemical Co., Ltd. | CPE | Keliren® |
| Starflam PA12 Z31 (EXP) | Eurostar Engineering Plastics | Nylon 12 | Starflam |
