Order Products : sales@su-jiao.com
EMERGE™ PC/ABS 7350
| Category: | PC+ABS , Advanced Resin |
| Manufacturer: | Trinseo |
| Trademark: | EMERGE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IuRFF3_EMERGE-PC-ABS-7350.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EMERGE™ PC/ABS 7350 advanced resin is a high flow and high toughness PC/ABS alloy. It is designed for thin wall application with high heat requirement. Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 230°C/3.8 kg | 4.2 | g/10 min | |
| 260°C/5.0 kg | 25 | g/10 min | |
| Molding Shrinkage - Flow | 0.40 to 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 3.20 mm, Injection Molded) | 53.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 3.20 mm, Injection Molded) | 130 | % | ASTM D638 |
| Flexural Modulus (3.20 mm, Injection Molded) | 2600 | MPa | ASTM D790 |
| Flexural Strength (3.20 mm, Injection Molded) | 87.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 700 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Annealed, 3.20 mm | 120 | °C | |
| 1.8 MPa, Unannealed, 3.20 mm | 105 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating 1 | UL 94 | ||
| 1.00 mm | HB | ||
| 3.20 mm | HB |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Rear Temperature | 230 to 250 | °C | |
| Middle Temperature | 240 to 260 | °C | |
| Front Temperature | 250 to 270 | °C | |
| Nozzle Temperature | 240 to 270 | °C | |
| Mold Temperature | 60.0 to 80.0 | °C |
| Note Message | |
|---|---|
| 1 . | This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL STAR™ SX 218 V60 BLACK Z | Solvay Engineering Plastics | Nylon 6 | TECHNYL STAR™ |
| SUPREME Specialty PS SP6410 0003 | Supreme Petrochem Ltd. | PS (HIPS) | SUPREME Specialty PS |
| Moplen RP2795 | LyondellBasell Industries | PP Random Copolymer | Moplen |
| EFRHATAN 85 | Crosspolimeri S.p.A. | PUR-Ester | EFRHATAN |
| LUVOCOM® 1-7032-B | LEHVOSS Group | Nylon 66 | LUVOCOM® |
