Order Products : sales@su-jiao.com

ALCUDIA® LDPE 2321FS

Category:	LDPE , Low Density Polyethylene
Manufacturer:	REPSOL
Trademark:	ALCUDIA® LDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Iu7ukq_ALCUDIA-LDPE-2321FS.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

ALCUDIA® 2321FS is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for thin blown film applications. This material offers easy processability and good balance of mechanical and optical properties. It contains slip (erucamide), antioxidant, antiblock and antistatic additives.

TYPICAL APPLICATIONS

High-quality packaging films

Packaging of foods, paper and textiles

The film can be used either in lay-flat form or converted for applications where low friction is required.

Recommended melt temperature range from 150 to 180°C. Processing conditions should be optimised for each production line.

General Information
Additive	Erucamide Lubricating Additive Anti-caking agent Antistatic property Antioxidation
Features	Low friction coefficient smoothness Optical Anti-caking property Antistatic property Antioxidation Workability, good Compliance of Food Exposure
Uses	Packaging Films Food packaging
Agency Ratings	European food contact, not rated
Processing Method	Blow film

Physical	Nominal Value	Unit	Test Method
Density (23°C)	0.923	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.1	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction (vs. Itself - Dynamic, Blown Film)	0.10		ISO 8295

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	40	µm
Film Puncture Energy (40 µm)	1.30	J	ASTM D5748
Film Puncture Force (40 µm)	50.0	N	ASTM D5748
Tensile Stress			ISO 527-3
MD : Broken, 40 µm, blown film	26.0	MPa	ISO 527-3
TD : Broken, 40 µm, blown film	20.0	MPa	ISO 527-3
Tensile Elongation			ISO 527-3
MD : Broken, 40 µm, blown film	350	%	ISO 527-3
TD : Broken, 40 µm, blown film	600	%	ISO 527-3
Dart Drop Impact (40 µm, Blown Film)	100	g	ISO 7765-1
Elmendorf Tear Strength			ISO 6383-2
MD : 40 µm, blown film	5.0	N	ISO 6383-2
TD : 40 µm, blown film	3.0	N	ISO 6383-2

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	111	°C	ISO 306/A

Optical	Nominal Value	Unit	Test Method
Gloss (45°, 40.0 µm, Blown Film)	85		ASTM D2457
Haze (40.0 µm, Blown Film)	8.0	%	ASTM D1003

Additional Information
Data taken from 40 µm thickness film, blow up ratio 2.5:1.

Extrusion	Nominal Value	Unit
Melt Temperature	150 - 180	°C

Resin Grade	Manufacturer	Category	Trademark
Sylvin 86014-80 Clear	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Topolymer® 5711-801M	Dongguan Top Polymer Enterprise	TPE	Topolymer®
Vyncolit® E 8436FR-397	Vyncolit N.V.	Epoxy	Vyncolit®
ColorRx® PSU-1000RX	LTL Color Compounders, Inc.	PSU	ColorRx®
Geon™ Vinyl Flexible R4510H	PolyOne Corporation	PVC, Flexible	Geon™ Vinyl Flexible