Order Products : sales@su-jiao.com
RTP 1200 S-85A
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | InvQig_RTP-1200-S-85A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| RTP 1200 S-85A is a thermoplastic polyurethane elastomer (polyester)(TPU-polyester) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.50 - 0.90 | % | ASTM D955 |
| Moisture Content | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 83 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 5.02 | MPa | ASTM D412 |
| Tensile Strength 1(Break, 3.20 mm) | 29.7 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 560 | % | ASTM D412 |
| Tear Strength 3 | 100 | kN/m | ASTM D624 |
| Compression Set 4(23°C, 22 hr) | 25 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 | hr | |
| Processing (Melt) Temp | 199 - 216 | °C | |
| Mold Temperature | 26.7 - 65.6 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | C mold, 500 mm/min |
| 2 . | Mouth die C, 500 mm/min |
| 3 . | C mould |
| 4 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC M1485 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| SABIC® PPcompound G3230A | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® PPcompound |
| APEX® RE 9203 | Teknor Apex Company | PVC, Rigid | APEX® |
| Epolene® C-15P | Westlake Chemical Corporation | LDPE | Epolene® |
| Petrothene® LM600700 | LyondellBasell Industries | HDPE | Petrothene® |
