Order Products : sales@su-jiao.com
ResMart Ultra TPU 90A ES
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | ResMart |
| Trademark: | ResMart Ultra |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IiZhIt_ResMart-Ultra-TPU-90A-ES.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyester based TPU Shore 90A hardness for injection molding or extrusion applications |
| General Information | |
|---|---|
| Agency Ratings |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 31.0 | MPa | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Elongation (Break) | 440 | % | ASTM D412 |
| Tear Strength | 115 | kN/m | ASTM D624 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 82.2 to 104 | °C | |
| Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr | |
| Suggested Max Moisture | 0.010 | % | |
| Processing (Melt) Temp | 185 to 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALCOM® PA66 910/9.1 GF/MR40 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
| Ducor® 2640 RC | Ducor Petrochemicals BV | PP Impact Copolymer | Ducor® |
| KetaSpire® KT-880P | Solvay Specialty Polymers | PEEK | KetaSpire® |
| INEOS Wire & Cable BPD2000E | INEOS Olefins & Polymers Europe | LDPE | INEOS Wire & Cable |
| MAGNUM™ 3616 | Trinseo | ABS | MAGNUM™ |
