Order Products : sales@su-jiao.com
LNP™ LUBRICOMP™ BX02715 compound
| Category: | SAN , Styrene Acrylonitrile |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | LNP™ LUBRICOMP™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IhBD81_LNP-LUBRICOMP-BX02715-compound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP LUBRICOMP BX02715 is a compound based on SAN containing proprietary fillers. Added features of this grade include: Wear Resistant, Tight Dimensional Tolerance, Good for Water Meter Applications. Also known as: LNP* LUBRICOMP* Compound PDX-B-02715 Product reorder name: BX02715 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.34 | g/cm³ | ASTM D792 |
| -- | 1.35 | g/cm³ | ISO 1183, ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 24 hr | 0.20 to 0.40 | % | |
| Across Flow : 24 hr | 0.30 to 0.50 | % | |
| Water Absorption | |||
| 24 hr, 50% RH | 0.11 | % | ASTM D570 |
| Equilibrium, 23°C, 50% RH | 0.15 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 9180 | MPa | ASTM D638 |
| -- | 8460 | MPa | ISO 527-2/1 |
| Tensile Strength | |||
| Break 2 | 60.8 | MPa | ASTM D638 |
| Break | 58.0 | MPa | ISO 527-2/5 |
| Tensile Elongation | |||
| Break 3 | 1.1 | % | ASTM D638 |
| Break | 1.0 | % | ISO 527-2/5 |
| Flexural Modulus | |||
| 50.0 mm Span 4 | 8100 | MPa | ASTM D790 |
| -- 5 | 7970 | MPa | ISO 178 |
| Flexural Stress | |||
| -- | 71.0 | MPa | ISO 178 |
| Break, 50.0 mm Span 6 | 87.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 11 | J/m | ASTM D256 |
| 23°C 7 | 1.4 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact | |||
| 23°C | 83 | J/m | ASTM D4812 |
| 23°C 8 | 6.6 | kJ/m² | ISO 180/1U |
| Instrumented Dart Impact | |||
| 23°C, Total Energy | 3.10 | J | ASTM D3763 |
| -- | 0.900 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, 3.20 mm | 101 | °C | ASTM D648 |
| 0.45 MPa, Unannealed, 64.0 mm Span 9 | 101 | °C | ISO 75-2/Bf |
| 1.8 MPa, Unannealed, 3.20 mm | 96.0 | °C | ASTM D648 |
| 1.8 MPa, Unannealed, 64.0 mm Span 10 | 96.0 | °C | ISO 75-2/Af |
| CLTE | ASTM D696 | ||
| Flow : -30 to 30°C | 3.9E-5 | cm/cm/°C | |
| Transverse : -30 to 30°C | 4.5E-5 | cm/cm/°C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.15 | % | |
| Rear Temperature | 204 to 216 | °C | |
| Middle Temperature | 243 to 254 | °C | |
| Front Temperature | 277 to 288 | °C | |
| Processing (Melt) Temp | 260 | °C | |
| Mold Temperature | 82.2 to 93.3 | °C | |
| Back Pressure | 0.172 to 0.344 | MPa | |
| Screw Speed | 30 to 60 | rpm |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | Type I, 5.0 mm/min |
| 3 . | Type I, 5.0 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 2.0 mm/min |
| 6 . | 1.3 mm/min |
| 7 . | 80*10*4 |
| 8 . | 80*10*4 |
| 9 . | 80*10*4 mm |
| 10 . | 80*10*4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spectar™ FR1000 | Eastman Chemical Company | Copolyester | Spectar™ |
| Moplen T50G | Shazand (Arak) Petrochemical Corporation | PP Homopolymer | Moplen |
| Fainplast PVC PM 5580 | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| Lucky Enpla LPC1001F 9306 | Lucky Enpla Co LTD | PC | Lucky Enpla |
| TAFMER™ MD715 | Mitsui Chemicals, Inc. | PAO | TAFMER™ |
